Just interested what you guys do and in what order?
I tend to do things like this:
Shampoo
Rinse off with water
Clay bar the whole car
Rinse again with water
Machine polish whole car(normally with G3 cutting compound, have done with auto glym polish)
Buff clean with microfibre cloth
Wax with auto glym wax (going to buy some dodo juice orange crush as it has been recommended by a friend)
I'm fairly new to detailing, if you can let me know if I'm doing anything wrong or what you do/what j should be doing. I'm not to sure on interior and windows either? I tend to just Hoover interior and wipe down dash and bits with a microfibre. Thanks!
Detailing procedure?
Moderator: martauto
-
Cloggy Saint
- Old Skooler

- Posts: 8026
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
DEEP CLEAN
Snow foam
Rinse
Degrease
Rinse
Iron/Tar remover
Rinse
Wash
Rinse
POLISH
Clay Bar
Rinse
Machine Polish
WAX
Paint cleanse
Seal
Wax
Wax again

This is one I did earlier...deep clean only
http://www.e30zone.net/modules.php?name ... ight=lotus
Snow foam
Rinse
Degrease
Rinse
Iron/Tar remover
Rinse
Wash
Rinse
POLISH
Clay Bar
Rinse
Machine Polish
WAX
Paint cleanse
Seal
Wax
Wax again
This is one I did earlier...deep clean only
http://www.e30zone.net/modules.php?name ... ight=lotus
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
You forgot final wipe down with a QD 
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
cheers guys, is there anything im doing wrong, or anything that i should add in there? i need to order some differend pads for the machine polisher as I only have the one at the moment which is like a fluffy fury one which i dont think does too much. What do you guys recommend? 
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
with any paste wax i always do a final wipe down, depending on the wax i may use Zaino Z8.Gavla wrote:Is it worth doing?Kos wrote:You forgot final wipe down with a QD
I sometimes use Gtechniq C2V3 as a final wipe depending on the colour of the car...
Kleers sent me this the other day. my opinion is that it is a QD as such
http://www.kleers.com/exterior-products ... mist-spray
"Designed mainly for use after waxing and when paintwork is clean, this easy to apply spray is ideal for ensuring that any residue or unwanted marks are removed where quick detailing is required, leaving a just waxed shine"
when using a nano product (normally wolfs body guard) i also find a final wipe down wit a QD help for the reason above
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
Thanks!diable wrote:Phone Gavla
Sit back have a few beers
3 hours later pay Gavla
Job done........
Good for you! Just remember the 4 P's...Product / Preparation / Procedure / Patience...Job done!Sambe30 wrote:Haha I want to do it myself not pay other people
The type of pad really depends on;Sambe30 wrote:cheers guys, is there anything im doing wrong, or anything that i should add in there? i need to order some differend pads for the machine polisher as I only have the one at the moment which is like a fluffy fury one which i dont think does too much. What do you guys recommend?
Dual Action or Rotary Polisher
Paint Hardness
Paint Thickness
Paint Condition
Polish



