Conversion Specialist

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Post Reply
User avatar
Benjibrady
E30 Zone Newbie
E30 Zone Newbie
Posts: 19
Joined: Tue Nov 11, 2014 11:00 pm

Sun Dec 07, 2014 4:52 pm

Hi all,

I know the topic has been covered several times before, but i did a search and couldn't see any threads regarding companies that offer it.

A friend has offered me a m52b28 for £100 (from an e36 so id still have to buy associated conversion components). Has anyone used a reasonably priced garage/specialist for a conversion? There is someone on eBay offering it for circa £1800 but in my eyes that seems extortionate.

Any help appreciated
age
Formerly twist316
Posts: 448
Joined: Sun Dec 28, 2008 11:00 pm
Location: cork ireland (kosice slovakia)

Sun Dec 07, 2014 5:31 pm

danthe on here is our resident m52 guru
M40 rightness if you can get to 6000rpm noone can hear your tappets
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Sun Dec 07, 2014 6:20 pm

Basic conversion is about 40 hours work,so multiply that by your chosen garage's hourly rate.


Really,though,given the wealth of knowledge within the zone,any keen diyer/practical car enthusiast type can carry out an M50/52 conversion,I managed it!
Youth is wasted on the young.
User avatar
Benjibrady
E30 Zone Newbie
E30 Zone Newbie
Posts: 19
Joined: Tue Nov 11, 2014 11:00 pm

Sun Dec 07, 2014 7:19 pm

Thanks guys. I have the technical ability, however I lack space and a crane.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Sun Dec 07, 2014 8:05 pm

Benjibrady wrote:Thanks guys. I have the technical ability, however I lack space and a crane.
Then rent a lock up for a month or two and buy a s/h crane from ebay! :D
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28644
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Sun Dec 07, 2014 8:18 pm

This one? - http://www.ebay.co.uk/itm/E36-Engine-Co ... 19f8474324

I see there are no engine bay pictures of an E30 in the advert, just the plug and play E36 stuff.
User avatar
Benjibrady
E30 Zone Newbie
E30 Zone Newbie
Posts: 19
Joined: Tue Nov 11, 2014 11:00 pm

Sun Dec 07, 2014 9:33 pm

Yeah that's the one Dan. Perhaps I'm underestimating the amount of work but it seems like a lot?
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28644
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs
Contact:

Mon Dec 08, 2014 9:06 am

As Malcolm stated above, 40 hours work, plus the parts?
If you want a proper job that lasts years rather than weeks you are looking at spending at least £1000 on parts alone
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Mon Dec 08, 2014 9:27 am

i do these conversions , where are you located ?
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
Benjibrady
E30 Zone Newbie
E30 Zone Newbie
Posts: 19
Joined: Tue Nov 11, 2014 11:00 pm

Mon Dec 08, 2014 11:02 am

Thanks for the advice Dan.


Magpie I'm in Hampshire but would travel.
Post Reply