318is springs on 325

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Gavt
E30 Zone Newbie
E30 Zone Newbie
Posts: 153
Joined: Wed Apr 10, 2013 11:00 pm

Post Tue Oct 28, 2014 4:29 pm

How low or how horrible would the drive be if I fitted standard 318is springs front and rear on a 325. Would the engine be to heavy and ride to low. Cheers
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Tue Oct 28, 2014 4:47 pm

Air con spec 318is springs are the same rate as povo spec 325 springs.

The weight difference is not as extreme as people would make you believe.

Most people would not be able to tell.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
markus_74
E30 Zone Camper
E30 Zone Camper
Posts: 1078
Joined: Fri Jan 26, 2007 11:00 pm
Location: Kudus city, Indonesia

Post Thu Oct 30, 2014 7:50 am

sorry to hijack the thread, but how is I use e30 m40 318i front and rear spring? does is it still OK? or become to low or soft?
jimbom30cab
Tech 1 freak
Posts: 7631
Joined: Mon Oct 12, 2009 11:00 pm
Location: in the garage

Post Thu Oct 30, 2014 9:03 am

Is there anywhere with all the spring ratings
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Oct 30, 2014 9:59 am

Use one of the online ETKs to identify the part # of a particular spring, then paste that # into the "search BMW part by partnumber" box on the home page. This will give yo a list of all BMWs that used that spring, and allow you to 'drill down' to find the exact models.
For instance, it will show that the iS front spring, 31 33 1 130 046, is used on the European M3 with aircon, is the European RH drive m tech spring for two door saloons, and for many others.