Hi imnfinishing my m52 conversion I have the lightened m20 flywheel and the m20 starter but when you go to start it it won't engage? The motor turns freely and I have tested the starter on the bench and it works. I've also went straight to the starter and put 12vs down it like on the bench and it just makes a clicking noise?
Any help would be much appreciated
Jon
M20 starter not engaging
Moderator: martauto
The power cable came off the battery so now it comes out and spins but doesn't want to engage the flywheel and I have tried 2 starters? Surely not both starters have gone they're came out of my car working! There isn't something silly I'm missing?
hi, The reason you hear the clicking noise because the starter not in good position, the small gear hit the flywheel. So just try to move the starter up a bit and everything will be fine.and1_e30 wrote:The power cable came off the battery so now it comes out and spins but doesn't want to engage the flywheel and I have tried 2 starters? Surely not both starters have gone they're came out of my car working! There isn't something silly I'm missing?
-
HairyScreech
- Engaged to the E30 Zone
- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Slacken the bolts off about a turn and then see if it engages.
If so you likely have missed a dowel from the gearbox when fitting the box.
If so you likely have missed a dowel from the gearbox when fitting the box.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
ok cheers ill try that tomorrow the dowel I'm sure there all in, how would a dowel matter surely if all the bolts are in it shouldn't matter? i have also turned the engine loads of time and tried starting it in different positions
I've slackened the bolts off then I've take the gearbox out and check all the dowels and there in? I don't see how it is doing it as in the starter can't move I've even elongated the holes abit so u have a bit of play so I can move it up and down a touch and still nothing?
right i have 2 starters and tryed both i found out that one isn't working. i have taken both apart and put the teeth on the flywheel one fits and one doesn't the one that fits is the broken one and it 10tooth instead of 9. i have a part number on it which is 63223433 magnetic marelli but what is the bmws part number as i can't find it out.
cheers
jon
cheers
jon
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
BMW 12411279747
BMW 12411718750
BMW 12411719999
BMW 12411720643
BMW 12411725786
BMW 12411726504
BMW 12411726508
BMW 12411735608
BMW 12411718750
BMW 12411719999
BMW 12411720643
BMW 12411725786
BMW 12411726504
BMW 12411726508
BMW 12411735608
everyone I've found is all 9teeth not 10? i can't for the life of me find a 10tooth one. the numbers on the starter i type in google and eBay they all come up as 9tooth starters does anyone sell a 10tooth? really frustrating i really need to get the car sorted and on the road!
-
BMW_E30vert
- E30 Zone Regular
- Posts: 705
- Joined: Thu Mar 11, 2010 11:00 pm
- Location: Greater London
Could you not get the 10tooth one repaired?
That's what I was thinking but surely they still make them :s it's confusing I've searched and I've found one bloke in Australia a few years ago with that problem but it doesn't say if he got a new starter or not! And I can't seen to sign up to that forum to message him 