318is exhaust options?
Moderator: martauto
- BHadley
- E30 Zone Regular

- Posts: 902
- Joined: Sun Sep 06, 2009 11:00 pm
- Location: Newton abbot, Devon
- Contact:
Hi,
As above what options do I have for a e30 318is exhaust?
Mine is rotten/soft/old/leaking from front pipe back in various places
The only ones I have seen avalible is a bosal rear box and a jetex half system!
Really, is that all there is ?
Can't afford new bmw dealer stuff (£500++!)
Is there much bore difference in for a 318i compared to the 318is and would it even line up?
Thought I'd ask what's out there else it's universial backbox and patching........which I really really want to avoid!
Ta in advance
As above what options do I have for a e30 318is exhaust?
Mine is rotten/soft/old/leaking from front pipe back in various places
The only ones I have seen avalible is a bosal rear box and a jetex half system!
Really, is that all there is ?
Can't afford new bmw dealer stuff (£500++!)
Is there much bore difference in for a 318i compared to the 318is and would it even line up?
Thought I'd ask what's out there else it's universial backbox and patching........which I really really want to avoid!
Ta in advance
Not much available here for the iS as they were only made for a short time. There are some available in the US as they only got the M42 engine, but shipping is a pain.
The 318i exhaust won't match up to the manifold and is 1/4" smaller bore.
Where did you find a Bosal rear box?
The 318i exhaust won't match up to the manifold and is 1/4" smaller bore.
Where did you find a Bosal rear box?
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
- BHadley
- E30 Zone Regular

- Posts: 902
- Joined: Sun Sep 06, 2009 11:00 pm
- Location: Newton abbot, Devon
- Contact:
Mr exhaust website, bosal rear box goes all the way to the back of two bolt flange towards the downpipe.
I'll have a look at yank sites see how much shipping could be.
I just want something standard sounding not boomy and raspy.... Done that!
I'll have a look at yank sites see how much shipping could be.
I just want something standard sounding not boomy and raspy.... Done that!
- BHadley
- E30 Zone Regular

- Posts: 902
- Joined: Sun Sep 06, 2009 11:00 pm
- Location: Newton abbot, Devon
- Contact:
Just looked it up, does cover 80% of my problem may be able to save the downpipe.
Just didn't want overly noisey system, and this looks smaller than the massive bosal unit I took off.
Apparently it's very restrictive at the back box .
Thanks!
Just didn't want overly noisey system, and this looks smaller than the massive bosal unit I took off.
Apparently it's very restrictive at the back box .
Thanks!
- DaveMcleod88
- E30 Zone Newbie

- Posts: 104
- Joined: Fri Jan 03, 2014 11:00 pm
- Location: Edinburgh
mine has a loud exhaust straight pipe dtm style rear box is pretty loud isnt too bad in the cab tho fheres what they sound like
im not a yobo just dont want to buy a new exhaust system as im planning to change the engine (came with the car)
im not a yobo just dont want to buy a new exhaust system as im planning to change the engine (came with the car)
Bosal are said to be a OEM supplier to BMW.
I have a Powerflow exhaust off my old IS for sale if you're interested. It's not too loud but clearly doesn't produce a standard note. It burbles a fair bit on idle.
I'll dig out some photos if you're interested..
Here's link of the engine running with the Powerflow exhaust, it's a bit tediously long, there's a little footage at the end taken from the rear box..
I have a Powerflow exhaust off my old IS for sale if you're interested. It's not too loud but clearly doesn't produce a standard note. It burbles a fair bit on idle.
I'll dig out some photos if you're interested..
Here's link of the engine running with the Powerflow exhaust, it's a bit tediously long, there's a little footage at the end taken from the rear box..
- BHadley
- E30 Zone Regular

- Posts: 902
- Joined: Sun Sep 06, 2009 11:00 pm
- Location: Newton abbot, Devon
- Contact:
Bosal and klarias do seem to be the better ones out of a bad bunch... Anyway ..
G bear: did look at the vid does not seem to be overly noisey, did have a powerflow on a previous car and one of the silencers had the baffles go (it did take four years mind)
Does the system include a downpipe too (from manifold join) or is it just from the two bolt flange (from downpipe to system silencers)
I am still welding the sorry turd up so could be a while before I need it ....(it's off road al fresco workshop style).
I would be interested in pics & How much would you want for it ..
G bear: did look at the vid does not seem to be overly noisey, did have a powerflow on a previous car and one of the silencers had the baffles go (it did take four years mind)
Does the system include a downpipe too (from manifold join) or is it just from the two bolt flange (from downpipe to system silencers)
I am still welding the sorry turd up so could be a while before I need it ....(it's off road al fresco workshop style).
I would be interested in pics & How much would you want for it ..
My apologies, I knew Eberspacher was OEM, I must have got Boysen and Bosal in a muddle.darkchild wrote:No they're not. Boysen and Eberspacher are the OE manufacturers. Bosal are cheap junk like Walker and Timax/Klarius etc.G-Bear wrote:Bosal are said to be a OEM supplier to BMW.
From what I remember I think its just the rear box and pipes to the middle of the car, the front section is BMW. I'll double check, its still attached to the car. I'll have some time to look tomorrow.slideout318i20 wrote:
Does the system include a downpipe too (from manifold join) or is it just from the two bolt flange (from downpipe to system silencers)
But in the mean time I should have some more pics. PM me your email and I'll send them over.


