320i/325i to 327 conversion - help

Post Mon Jan 23, 2006 12:59 pm

Can anybody help!

I was thinking of buying either a 320i or 325i either 2 or 4 door car with a good bodywork and having it converted to a 327.

What do I need and where can I get the parts with approximate costs and then who would be the best person to carry out the conversion with approx costs.( I would probably change the camshaft as well to 274schrick!)

I am buying the car as a second vehicle and there would be no immediate rush but I need to set a budget and starttalking to people.

Has anybody done either conversion ?

Any help appreciated!

Regards

Ian

( Merseyside Area )

Post Mon Jan 23, 2006 1:03 pm

hunt around in the tech section or highly moded there are loads and loads of tips there from guys who have built them

Post Mon Jan 23, 2006 1:16 pm

Hi mate, as Kos said, please have a read through this forum
http://www.e30zone.co.uk/modules.php?na ... forum&f=28

There's loads of 2.5-2.7 posts, if there's anything there your not sure of, post a question on the topic you're reading, this will help others then if the same question comes up again.