Hi guys
I'm fitting a z3 rack to my e30 which has new z3 control arms fitted, are these ok to use or do I have to replace them with e30 ones ?
Thanks in advance
Fitting a z3 rack
Moderator: martauto
-
MrWhite
- E30 Zone Regular
- Posts: 721
- Joined: Fri Mar 14, 2008 11:00 pm
- Location: Renfrewshire
Z3 ones are fine, I've used them on my conversion. Same as E36 ones.
rust never sleeps
-
Blitz
- Married to the E30 Zone
- Posts: 11155
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
Make sure you replace the outer ball joints with Meyle HD version because the original e36 design is poor and wears out much faster and has play from new compared to the e30 style one.
-
HairyScreech
- Engaged to the E30 Zone
- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Do you mean lower wishbones or track rods?
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&