new monster v8 no 4.0 here !!! Start up vid on page 28 :)

Discuss general engine, turbo and supercharger conversions in this section

Moderator: martauto

manse73
E30 Zone Camper
E30 Zone Camper
Posts: 1110
Joined: Sat Mar 20, 2010 11:00 pm
Location: in a town near you

Sun Sep 14, 2014 9:49 pm

I bet you are grinning from ear to ear now. Not so deflated now now keep going Ross nearly there now well done :D
bruv chariots rule
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sun Sep 14, 2014 10:17 pm

cypriot_boy_2k7 wrote:Spark blowout? Due to little spark?
na mate just a cheap shit dizzy lol prob cross firing and alsorts
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sun Sep 14, 2014 10:18 pm

manse73 wrote:I bet you are grinning from ear to ear now. Not so deflated now now keep going Ross nearly there now well done :D
dam right kev been trying to sort it out since you was here finally done it
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
cypriot_boy_2k7
E30 Zone Squatter
E30 Zone Squatter
Posts: 1641
Joined: Mon Jan 29, 2007 11:00 pm
Contact:

Mon Sep 15, 2014 10:32 am

Well done dude. Strap them turbos on there :D
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Mon Sep 15, 2014 10:54 am

one already on mate just waiting for the other one to come bk
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sat Sep 20, 2014 10:13 pm

well not much to update really
fitted the new electric fans
most of the engine bay is done now , and I've found out why the engine wasn't running right the dizzy was faulty
swapped it and it is now fine, so ordered a new one which will be here Monday hopefully,
prop shaft has been ordered and is in the process of being made
bleed the brakes and the clutch and were just about there

I actually pulled her out gave her a wash today gonna clay and polish it tomoz but here just a couple of pics from today

Image
Image
Image
Image
Image
Image
Image
Image
Image

and the bonnet still fits ;)

Image
Image
Image
Image
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Speedtouch
Old Skooler
Old Skooler
Posts: 14009
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Sat Sep 20, 2014 10:18 pm

Looks great - what a mean beast. 8)
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sat Sep 20, 2014 10:36 pm

Speedtouch wrote:Looks great - what a mean beast. 8)
certainly is different mate
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Speedtouch
Old Skooler
Old Skooler
Posts: 14009
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Sat Sep 20, 2014 10:39 pm

What's the car lurking under the tarpaulin? winkeye
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sat Sep 20, 2014 10:40 pm

Speedtouch wrote:What's the car lurking under the tarpaulin? winkeye
on the left or the right ?
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Speedtouch
Old Skooler
Old Skooler
Posts: 14009
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Sat Sep 20, 2014 10:42 pm

Either/both.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sat Sep 20, 2014 10:50 pm

lol on the left sorry to dissapoint but its a trailer tent lol and on the right is my dads ford falcon
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Speedtouch
Old Skooler
Old Skooler
Posts: 14009
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Sat Sep 20, 2014 10:55 pm

Ah, I guessed it may be an old Ford of some sort.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Sat Sep 20, 2014 11:01 pm

its the yellow yank one i posted a while bk
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
manse73
E30 Zone Camper
E30 Zone Camper
Posts: 1110
Joined: Sat Mar 20, 2010 11:00 pm
Location: in a town near you

Tue Sep 23, 2014 11:05 pm

How's it looking captain claybar :D
bruv chariots rule
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3482
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Tue Sep 23, 2014 11:20 pm

Great work, what's the plan regards getting it run in / mapped / next step then?

Is it time for the wallet to have a rest yet then? Bet its still smoking after the speed of this build lol :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Sep 24, 2014 7:26 am

thanks dude, plan is basically to run it on the carb for now put some miles on it then over winter I'll swap
it all to efi and run it on standalone
I've still just spent a grand this last week lol
so yeah think I need to cool the wallet situ down for a bit lol
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Sep 24, 2014 3:51 pm

well doesn't look like I'm going to make santa pod now , as I've got gearbox issues and running out of time suppose there's always next year :cry: :cry: :cry:
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Speedtouch
Old Skooler
Old Skooler
Posts: 14009
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Wed Sep 24, 2014 4:24 pm

What's the problem with the gearbox?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Sep 24, 2014 4:44 pm

it seems to be locking in direct drive when in nuetral, I've had to take it out again and it's now in bits on my bench I can't find nothing wrong with it
one thing I have noticed this is going to be a little hard to explain but the input shaft is seperate to the main shaft, the outer bearing isn't holding the input shaft in place as it has a big circlip that stops the input shaft from falling into the 2-3 gear syncro Hub , there's play in the input shaft so it's falling bk on to the shift keys or sliders and locking it in to direct drive even tho it's in neutral it's abit weird, I can't figure out how it's done it or how to remedy it
Last edited by ross2009 on Wed Sep 24, 2014 9:01 pm, edited 1 time in total.
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Speedtouch
Old Skooler
Old Skooler
Posts: 14009
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Wed Sep 24, 2014 5:25 pm

Blimey, not what you want, putting it in neutral and finding it's still driving, particularly with a twin-turbo V8 up front! :eek:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Sep 24, 2014 5:34 pm

exactly lol
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Sep 24, 2014 5:53 pm

and after posting that I've fixed it

one of the syncro rings was jammed on a gear
not allowing the sliders to go bk in to the syncro hub thus locking it in what seemed to be a gear
Last edited by ross2009 on Wed Sep 24, 2014 9:01 pm, edited 1 time in total.
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3482
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Wed Sep 24, 2014 6:03 pm

does that mean Pods back on then? :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Sep 24, 2014 6:14 pm

fingers crossed, I'm gonna have to really put some hours in but I'll try my hardest
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Thu Sep 25, 2014 9:52 pm

all bk together

[youtube][/youtube]
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
S38B38
E30 Zone Regular
E30 Zone Regular
Posts: 458
Joined: Sun Dec 24, 2006 11:00 pm
Location: Iceland

Thu Sep 25, 2014 11:10 pm

Totally mindblowing
Sveinbjörn Hrafnsson

E30 CABRIO M70B50 V12 5lug

ALPINA B10 BITURBO 346@507

550 V12 JML Motorsport

http://alpina.123.is/pictures/
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Mon Sep 29, 2014 7:18 pm

S38B38 wrote:Totally mindblowing
thanks :)

well i did make it to pod after all everythng was against me but i wernt going to let it beat me , we ended up towing it i dont live far from pod anyway towed it to the gate and i drove it in first time its really even been driven
have got a few little niggles and problems to sort out now like sump is nearly touching the floor exhaust one side is way to low etc etc
but im sure it will be fine

now just have to crack on with getting the efi sorted over winter now ready for next year

roll on 2015 !!!!
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
manse73
E30 Zone Camper
E30 Zone Camper
Posts: 1110
Joined: Sat Mar 20, 2010 11:00 pm
Location: in a town near you

Mon Oct 20, 2014 6:40 pm

Updates :D
bruv chariots rule
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Mon Oct 20, 2014 7:13 pm

Not really touched it kev only been doing little bits that needed doing most are done now , although the turbo that was rebuilt is now smoking already not even done 20 miles yet
Rad still needs modifying as that top hose is still near to the exhaust

Apart from that not much to do

I'm debating wether to even put it on the road now as the weathers getting crap , and I normally take it off the rd in winter so will just be a waste of money putting on the rd and only using it once or twice

I dunno mate
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Dec 10, 2014 5:47 pm

Well I havent done any up dates lately as the car is off the rd now for winter
But I have been doing a few little bits I now have a new set of wheels for it and a new front brake set up and currently collecting bits for a 5 stud conversion

Ordered my intercooler too

Image
Image

So here's the new brakes for the front
There 6 pots and 330mm discs compared to my old set up

Image
Image
Image
Image
Image

And the rears


Image
Image
Image
Image
Image


And my new rimzzzzz

Image
Image
Image
Image
Image

I'm not sure on the gold tho so thinking of changing it it another colour or get them polished still in 2 minds at the mo
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
glenn
Engine Transplant Services
Engine Transplant Services
Posts: 2198
Joined: Sat Jan 29, 2005 11:00 pm
Location: blackwood, south wales

Wed Dec 10, 2014 7:12 pm

nice rims ross..... 8)
i have a set on their way to me as we speak.... 8)

i'm sure i saw yours advertised when i was looking...did you get them from london..?
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Dec 10, 2014 7:29 pm

glenn wrote:nice rims ross..... 8)
i have a set on their way to me as we speak.... 8)

i'm sure i saw yours advertised when i was looking...did you get them from london..?
cheers glenn

youve got a set of hartges coming ??

yes mate there were in poland but i picked them up from london yes :)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
glenn
Engine Transplant Services
Engine Transplant Services
Posts: 2198
Joined: Sat Jan 29, 2005 11:00 pm
Location: blackwood, south wales

Wed Dec 10, 2014 7:39 pm

ross2009 wrote:
youve got a set of hartges coming ??
yes mate.

i thought i recognised the 5x112 re-dilling from the pics that were used.

you had them for a good price bud :cool:
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Wed Dec 10, 2014 7:45 pm

glenn wrote:
ross2009 wrote:
youve got a set of hartges coming ??
yes mate.

i thought i recognised the 5x112 re-dilling from the pics that were used.

you had them for a good price bud :cool:
yeah thats the only bad bit about them really
but i couldnt say no not at that price cos there worth alot more

i really dont know what to do with them tho they need either repainting cos hes done a crap job on them or get them polished
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Post Reply