Picked up new car last week, L plate 318 Touring on 150k miles.
Not done many mile yet as stripped out the seats for a big deep clean. But all back in now and took for a short run.
I was aware on collection that the prop shaft mount needs replacing, so ordered one.
And there appears to be a bit feint whine from the diff, so I'm hoping an oil change will help, or at least by me some time.
but on a drive there's also a fair bit of 'clunking' from the back end, at first I though it was all the stuff in the boot as there were a few spares and the side pockets were full.
But all that is empty now so unfortunately it appears to be mechanical.
Any pointers on what to check first? It passed an MOT in June so not long ago, so I would have thought any bushes would have been picked up.
Noisy back end
Moderator: martauto
-
BenHar
- E30 Zone Addict

- Posts: 3089
- Joined: Sun Jul 11, 2010 11:00 pm
- Location: Reigate, Surrey
Shock absorber top mounts.
Ben
Ben
-
eddypeck
- E30 Zone Regular

- Posts: 260
- Joined: Tue Aug 12, 2014 11:00 pm
- Location: Bristol, UK
Good call. I'll check it out, easy fix?
-
BenHar
- E30 Zone Addict

- Posts: 3089
- Joined: Sun Jul 11, 2010 11:00 pm
- Location: Reigate, Surrey
-
eddypeck
- E30 Zone Regular

- Posts: 260
- Joined: Tue Aug 12, 2014 11:00 pm
- Location: Bristol, UK
Thanks again, loving this site already 
E46 top mounts looks like a good idea, may aswell upgrade my rear speakers while I'm at it!
E46 top mounts looks like a good idea, may aswell upgrade my rear speakers while I'm at it!
-
milescook
- E30 Zone Camper

- Posts: 1285
- Joined: Thu Jan 13, 2011 11:00 pm
- Location: The 'bran of Cwm
My clunking turned out to be the exhaust not secured correctly - another place to check.
The story so far... http://www.cookracing.co.uk/
Also please help the race budget by watching some videos
https://www.youtube.com/cookracinguk
Also please help the race budget by watching some videos
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Yes to the above, either against the beam or the spare wheel well.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
eddypeck
- E30 Zone Regular

- Posts: 260
- Joined: Tue Aug 12, 2014 11:00 pm
- Location: Bristol, UK
Oh I need a weekend to give it a good look round, lol
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Not quite so easy to do top mounts on a touring as on other models, as bits of the side trim and seat belt reels have to come out.
Tape your socket onto the extension bar, and the nuts into the socket when you remove/refit. Anything that drops into the void will never be seen again, but will be heard frequently.
Tape your socket onto the extension bar, and the nuts into the socket when you remove/refit. Anything that drops into the void will never be seen again, but will be heard frequently.
