Hi,
As above - I can draw circles with the gear stick whether in gear or not.
I read somewhere there's such a thing as a 'shifter repair kit' & that if a Z3 one is purchased it will firstly fix the problem but also make a quick-shift style gear change...
Does any have experience with this issue that could shed some light....?
Loose gear stick
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
A wobbly gearstick is fixed like this:
http://www.e30zone.net/e30zonewiki/inde ... ar_Linkage
However, if you're doing that you might as well do the Z3 shifter at the same time (ignore the part about bending the shifter rod):
http://www.e30zone.net/e30zonewiki/inde ... conversion
http://www.e30zone.net/e30zonewiki/inde ... ar_Linkage
However, if you're doing that you might as well do the Z3 shifter at the same time (ignore the part about bending the shifter rod):
http://www.e30zone.net/e30zonewiki/inde ... conversion
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
AndyakaGod
- E30 Zone Newbie

- Posts: 30
- Joined: Mon Jan 21, 2013 11:00 pm
- Location: Doncaster
Thanks for this! Need to get into that e30wiki.
8 hours work sounds like a nightmare but suppose it needs to be done...!
8 hours work sounds like a nightmare but suppose it needs to be done...!
-
sweep
- Married to the E30 Zone

- Posts: 10110
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Drop rear end of gearbox down and replace the linkage bushes etc.
