trim fitting

Need technical Q/A then you're in the right place

Moderator: martauto

pukar
E30 Zone Addict
E30 Zone Addict
Posts: 2225
Joined: Tue Sep 08, 2009 11:00 pm

Post Wed Aug 06, 2014 7:14 am

hi guys,

how does this trim piece fit on?

Image

the one i have has a "stud" on the trim on the end nearest the door. the bodywork has a "clamp" in the centre and there is a hole in the bodywork at the back with a grommet. looks like it is the size for another stud as the "clamps" are too big to fit in the hole with the grommet..... :?

cheers...
Image
Top
votivequagmire
E30 Zone Regular
E30 Zone Regular
Posts: 428
Joined: Wed May 24, 2006 11:00 pm
Location: Swansea, South Wales.

Post Fri Aug 08, 2014 1:12 am

I had one of these apart a few years ago when I changed the front wing but I can't for the life of me remember how it was fixed.
All the parts are listed here and are available from the main stealers for pennies.

http://www.realoem.com/bmw/showparts.do ... g=51&fg=20

Hope this helps somewhat

:)
'88 325i M20, could've done with a sunroof.
Top
pukar
E30 Zone Addict
E30 Zone Addict
Posts: 2225
Joined: Tue Sep 08, 2009 11:00 pm

Post Fri Aug 08, 2014 2:50 am

Thanks mate, I didn't get a response so have already ordered some bits and bobs...going to stealers tomorrow to see what fits :D
Image
Top

Return to “E30 Technical Help”