Please, help needed with installing front window...

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
eeek30
E30 Zone Newbie
E30 Zone Newbie
Posts: 2
Joined: Tue Jul 22, 2014 11:00 pm

Post Wed Jul 23, 2014 1:32 pm

:?

I think I may be borderline retarded, seeing how I cannot figure out how in the hell to install a front driver window on my 2 door '89 325i. I've searched high and low, but can't find any DIYs or videos that really help. Any help from other members who've replaced front windows would be greatly appreciated. Anything, please!!!

She has power windows with the "scissor" style window hoists. Is there anything I need to loosen when replacing the window, or is it simply a matter of finding the perfect angle as I slide the window into the door?

Help out a dummy! :notworthy:
Top
User avatar
eeek30
E30 Zone Newbie
E30 Zone Newbie
Posts: 2
Joined: Tue Jul 22, 2014 11:00 pm

Post Wed Jul 23, 2014 1:58 pm

The glass is from a late model 2 door E30...it's the correct window, that isn't the issue. Thanks for asking!
Top
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jul 23, 2014 2:06 pm

eeek30 wrote:or is it simply a matter of finding the perfect angle as I slide the window into the door?
That's pretty much it! Angle's not that critical though.
Useful to have a wooden or plastic wedge handy to push in between the outer seal and the glass to hold the glass up in place while you refit the lifting mech.
Top
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Wed Jul 23, 2014 5:43 pm

Usually,it's getting the lifting mech into just the right position to allow you to slide the glass in.
'Just' a question of trial and lots of error!
Youth is wasted on the young.
Top

Return to “E30 Technical Help”