Do anyone know if it's possible to remove all or most of the bulkhead sound deadening in one piece so it's still suitable for refitting without stripping out all the brakes, fuse box, etc. and preferably without cutting it? Google hasn't come up with anything.
Cheers.
Bulkhead sound deadening removal.
Moderator: martauto
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Very unlikley it will come out in one due to degration of the material. But not impossible.
As you have put you self you will need everything out of the way first.
As you have put you self you will need everything out of the way first.
M30 Tech 1 Touring on gas.
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
As above; as soon as you remove the aluminium heat panel you'll find the sound-deadening underneath has degraded to jelly. However, I'm pretty sure it can be removed without disturbing the loom or brake pipes.
I cut mine when removing and superglued it back together when refitting - no problems since.
I cut mine when removing and superglued it back together when refitting - no problems since.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
ashje
- E30 Zone Regular
- Posts: 265
- Joined: Mon Oct 28, 2013 11:00 pm
Is there replacements out there which anyone would recommend? Is superglue heat resistant?