VADER LEATHER IN E30

Post Tue Jun 03, 2014 5:30 am

Hi I have heard that you can get some adaptor bracket thingys so the E36 vader seats can just bolt straight in to a E30. I don't really want anyone to be drilling holes in the floor.

Does anyone know where I can get some from and how much they will cost?.

Post Tue Jun 03, 2014 7:29 am

pm that foxyguy89 he sells them

Post Tue Jun 03, 2014 8:25 am

I can't seem to pm anyone!!

Post Wed Jun 04, 2014 2:57 pm

Ebay has loads usually? They're said to be pretty heavy, which is never inviting in most E30's..

Post Wed Jun 04, 2014 10:08 pm

I have tried eBay but can't find any.

Post Thu Jun 05, 2014 2:39 am

Are those not the ones in the first few listings in the link below..?

http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40

Post Thu Jun 05, 2014 5:42 am

Yes those are the seats. I have the vader seats but I need the brackets so they can just bolt straight into a e30. Some people drill through the floor to fit them in but I don't really want that I wanted these bracket thing which some people have and that way they bolt straight in without drilling through the floor.

Post Thu Jun 05, 2014 6:29 am

Oh I see. Sorry, should have read your original post properly.

Post Fri Jun 06, 2014 2:02 am

I can have them brackets made up but will have to get you a price

Post Sat Jun 07, 2014 6:11 am

If you could mate I would appreciate that. Will I need a smaller seat belt anchor too?.

Post Sat Jun 07, 2014 10:54 am

F9saf wrote:If you could mate I would appreciate that. Will I need a smaller seat belt anchor too?.

For coupe or convertible I guess your looking at. Yes it will need to be shortened but I wont be able to do that bit. Only the base brackets

Post Sat Jun 07, 2014 12:21 pm

I'd be interested in a set also

Post Sat Jun 07, 2014 12:29 pm

I would like to see how this his goes. Subscribed.

Post Sat Jun 07, 2014 10:26 pm

Yes it's for a convertible.

Post Mon Jun 09, 2014 11:04 pm

Just for clarification guys this is for the base brackets. Details to follow

Post Fri Jun 13, 2014 8:13 pm

Hi any luck????

Post Fri Jun 13, 2014 8:31 pm

Hi awaiting for the fabricators to get back to me

Post Sun Jun 15, 2014 5:12 am

Ok mate thanks.

Post Mon Jun 16, 2014 3:09 pm

I would be interested in a set for a touring.

Post Tue Jun 24, 2014 1:39 pm

Any good news yet?. Roughly how long till they get back to you?.

Post Fri Jun 27, 2014 11:58 pm

Still not heard back from the fabricators. Ill give them a call tomorrow

Post Tue Jul 01, 2014 5:47 am

Have you had any luck with the fabricators?.

Post Tue Jul 01, 2014 9:14 am

Yes I have, to be honest they are way too expensive, just for the brackets to be cut out they want £100, excluding bolts and powder coated

Post Wed Jul 02, 2014 2:25 am

So how much would it be all in?.

Post Wed Jul 02, 2014 2:26 am

And is there not anyone else you know that could do this or get hold of any

Post Wed Jul 02, 2014 11:44 am

Hi guys I didnt ask how much for the rest, I have asked a mate that works in a fabricators yesterday and he will let me know in a week or 2.

How many people are interested? So we can try get a better price

Post Thu Jul 03, 2014 5:50 am

ME!!!!!!! That's for sure LOL.

Post Thu Jul 03, 2014 8:41 am

Here is the DIY thread that most people talk about:

http://www.r3vlimited.com/board/showthread.php?t=128505

Post Thu Jul 03, 2014 11:12 am

NoTurbo wrote:Here is the DIY thread that most people talk about:

http://www.r3vlimited.com/board/showthread.php?t=128505

Thats what I started with, and found there to be a bit of movement in the seat.

Post Fri Jul 04, 2014 1:00 am

If you go on Google and type in kadunza. It's a company in America they have these but they are no longer available. Check them out and see if you can get some made up like that.