Hi guys
Was wondering if anyone can help..recently on my e30 325i cab Thers a rather load clunking noise coming from rear and feels likes something hitting the body underneath from rear..only happens if I drive it hard..if I set of normally without the hard revs Thers nothing?any ideas ?i personally think it's something to do with propshaft?thers no whines or anything coming from diff..some people suggested check the driveshafts etc may be loose?
Load clunking noise from rear e30 325i cab
Moderator: martauto
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Have you looked at the exhaust hangers? Might be that simple.

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
Altrezia
- E30 Zone Regular

- Posts: 323
- Joined: Tue Dec 01, 2009 11:00 pm
- Location: Hampshire, UK
Guibo / Rear trailing arm bushes.
-
B7gyg
- E30 Zone Newbie

- Posts: 11
- Joined: Wed Jan 29, 2014 11:00 pm
Will have a check Tomoz try get it on the ramp..hopefully something minor as only hapens if I launch of hard...driving normal nothing at all
-
Altrezia
- E30 Zone Regular

- Posts: 323
- Joined: Tue Dec 01, 2009 11:00 pm
- Location: Hampshire, UK
Yep, either of the ones I mentioned. I've done both - only made noises on track but totally silent on road.
-
Altrezia
- E30 Zone Regular

- Posts: 323
- Joined: Tue Dec 01, 2009 11:00 pm
- Location: Hampshire, UK
Guibo is easy - 4 bolts or something.
Rear bushes are a bastard to do on your back. Not impossible though (I've just done mine).
Rear bushes are a bastard to do on your back. Not impossible though (I've just done mine).
-
bmw9818
- E30 Zone Addict

- Posts: 2561
- Joined: Tue Aug 11, 2009 11:00 pm
- Location: Croydon
driveshafts,
i explored all options, exhaust, handbrake shoes shit hitting...
i pulled my shafts out yday and was met with this....




took a while but cleaned it out with some cotton buds and a shit load of brake cleaner swished about...
had metal particles i believe and shit inside...
packed it out fully with grease and hoping it does the job...
i explored all options, exhaust, handbrake shoes shit hitting...
i pulled my shafts out yday and was met with this....




took a while but cleaned it out with some cotton buds and a shit load of brake cleaner swished about...
had metal particles i believe and shit inside...
packed it out fully with grease and hoping it does the job...
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
A quick test is to check that all four diff bolts are on tightly. It's not unknown for one to work loose over time.
If they're all on tight, check the things others have said, and also check if your rear beam bushes have ever been done. If not, they're long overdue.
If they're all on tight, check the things others have said, and also check if your rear beam bushes have ever been done. If not, they're long overdue.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
BenHar
- E30 Zone Addict

- Posts: 3089
- Joined: Sun Jul 11, 2010 11:00 pm
- Location: Reigate, Surrey
Shock absorber top mounts?
Ben
Ben
-
Billwill
- E30 Zone Regular

- Posts: 363
- Joined: Sun Jun 26, 2011 11:00 pm
- Location: South Africa
Guibo or centre bearing maybe.....need to look at both at the same time!
Noises at all speeds is often the lower bolt on the rear shocks or the top mountings as stated.....doubt this is the case here.
Noises at all speeds is often the lower bolt on the rear shocks or the top mountings as stated.....doubt this is the case here.
