2. What is the standard sized discs on the front of a 316i?
3. Where would i get bigger front discs... and how much?
Cheers
Brake questions...
Moderator: martauto
-
coldo
- E30 Zone Regular
- Posts: 353
- Joined: Sun Jun 12, 2005 11:00 pm
- Location: Kilmarnock, Scotland
1. How easy/hard/expensive is a rear disc conversion on an '89 316i?
2. What is the standard sized discs on the front of a 316i?
3. Where would i get bigger front discs... and how much?
Cheers
2. What is the standard sized discs on the front of a 316i?
3. Where would i get bigger front discs... and how much?
Cheers
-
Simon
- E30 Zone Team Member
- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
1. Not easy, but more than possible, basically unbolt remove, and then bolt the replacement in it's place.coldo wrote:1. How easy/hard/expensive is a rear disc conversion on an '89 316i?
2. What is the standard sized discs on the front of a 316i?
3. Where would i get bigger front discs... and how much?
Cheers
2. Not sure of the size, but I believe they are the same diameter as vented discs...
3. Your best bet would eb to get hold of some calipers from a car with vented discs, get some new pads and discs, and bolt these on, instant brake upgrade.
