Wiring up my electric fan loom from Danthe, have hooked up to fuse 3 & relay K1 but not too sure where to connect the 3rd wire (black/brown), think it should connect to a green/black wire in my fuse box, but only colour of wire that's green/black is into fuse 19!!
Anybody out there that can point me in the right direction?
Wiring Question
Moderator: martauto
-
Robbo-80
- E30 Zone Regular

- Posts: 282
- Joined: Tue Jan 26, 2010 11:00 pm
- Location: Montrose, Scotland
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
I'm not sure on the wire colours, but from memory, power to the temp switch comes from fuse 19.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Robbo-80
- E30 Zone Regular

- Posts: 282
- Joined: Tue Jan 26, 2010 11:00 pm
- Location: Montrose, Scotland
I've got 2 black/green wires into fuse 19.
1 wire comes from inside the car & the other has a connector on the end with a black/white wire.
Any idea what 1 I connect up to?
1 wire comes from inside the car & the other has a connector on the end with a black/white wire.
Any idea what 1 I connect up to?
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
I would have emailed you instructions for this mate
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Dans the man to help with one of his looms 
But here's how I wired my fan in...
http://www.e30zone.net/e30zonewiki/inde ... n#Fuse_Box
But here's how I wired my fan in...
http://www.e30zone.net/e30zonewiki/inde ... n#Fuse_Box
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i got a pdf file on how to fit the loom when i got mine from Dan.....even i managed not to fook it up 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
You would try and chop your leg off if you were left alone for 5 minutesmagpie wrote:i got a pdf file on how to fit the loom when i got mine from Dan.....even i managed not to fook it up
M50 Turbo!!!
I shall say no more 
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
craigieeb wrote:You would try and chop your leg off if you were left alone for 5 minutesmagpie wrote:i got a pdf file on how to fit the loom when i got mine from Dan.....even i managed not to fook it up


m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
bet your laid up on the settee, getting your lass to do everything, poor mick
M50 Turbo!!!
I shall say no more 
