Best lowering springs for an e30?

Need technical Q/A then you're in the right place

Moderator: martauto

Jamie8GTi
E30 Zone Regular
E30 Zone Regular
Posts: 330
Joined: Fri Mar 01, 2013 11:00 pm
Location: Suffolk

Post Sat Mar 08, 2014 10:15 pm

Been looking at eibach springs and bilstein b4 shocks.. They claim a 30mm drop all round but with my m50 I think it will be a little more upfront! Anyone run these and could recommend them or if not any other quality springs? Cheers
Top
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Mar 08, 2014 10:25 pm

Stick with the Eibach and B4s. The M50's not that much heavier than a M20.
Thicker upper spring pads (9mm) are available if you're really fussy.
Top
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield

Post Sat Mar 08, 2014 10:30 pm

Brianmoooore wrote:Stick with the Eibach and B4s. The M50's not that much heavier than a M20.
Thicker upper spring pads (9mm) are available if you're really fussy.
Took the words right out my mouth lol
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
Top
User avatar
Mechagran
E30 Zone Newbie
E30 Zone Newbie
Posts: 66
Joined: Wed Jan 29, 2014 11:00 pm
Location: Devonshire

Post Sat Mar 08, 2014 11:00 pm

So far my experience with my h&r springs is very pleasant & generally have a good reputation. Took about 11 days to arrive and do a 40mm drop all round
Top
Jamie8GTi
E30 Zone Regular
E30 Zone Regular
Posts: 330
Joined: Fri Mar 01, 2013 11:00 pm
Location: Suffolk

Post Sun Mar 09, 2014 12:49 am

I'd prefer it if the fronts a little lower! will help with the look I'm going for! I was just worried 30mm wouldn't be enough... I think I'll order them and if worse comes to worse I'm sure I can sort something out!
Top
jas025
E30 Zone Regular
E30 Zone Regular
Posts: 395
Joined: Wed Aug 05, 2009 11:00 pm
Location: Back in Essex

Post Sun Mar 09, 2014 1:35 am

I went with MTEC and I'm more than happy with that choice but it depends on what you're looking for. I'm prioritising ride comfort and practicality.

A number of people said MTEC and Boge Turbos.
Top
j2b
E30 Zone Regular
E30 Zone Regular
Posts: 884
Joined: Fri May 21, 2010 11:00 pm
Location: Kent

Post Sun Mar 09, 2014 4:06 pm

If i remember correctly by fitting E90/92 top hats that gives you another 10mm drop on the front.

part number here 31336764093
89 more door 6 pot
Top

Return to “E30 Technical Help”