s50 oil filter housing on m52 vanos oil pipe fitment

[Sx279]

has any one put a s50 oil filter housing on a m52 engine and had issues with the vanos oil pipe..

the banjo bolt dosent screw into the filter housing as its too big..

any idears?

cheers


ps i have fitted the housing to put a oil cooler on the engine

[rich318i]

you need the adaptor, stepped banjo

[DanThe]

has any one put a s50 oil filter housing on a m52 engine and had issues with the vanos oil pipe..

the banjo bolt dosent screw into the filter housing as its too big..

any idears?

cheers


ps i have fitted the housing to put a oil cooler on the engine

Open it up to the correct thread, M14

[maf260]

I had the same issue. You need to open it up to the correct thread. I also needed a M3 power steering pump which also needed a little engineering to get the pipes to fit. It definitely wasn't the straight forward swap I was told, but now fitted it does a good job of keeping the oil temp under control.

[Sx279]

all sorted cheers people i made a new pipe with an fittings and braided hose..

i havent got pas pump on my e30 dont feel the need for it and as irs a track car less weight haha...

thanks again

[rich318i]

only reason for the pump is for the OEM style

[Rallyprep_UK]

I have a batch of conversion banjo bolts.

Makes life easy if you are not comfortable modding the housing...