Fitment of a a non air bag steering wheel
Moderator: martauto
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
Will a m tech 2 e36 steering wheel fit on to a car which has a air bag steering wheel ? is the fitment the same?
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
I'm pretty sure it will physically fit the column but there are differences in the horn wiring / slip ring. Plus you'd have to do something with the airbag wiring otherwise the light will be on all the time and it'll fail the mot.
cheers,
harry
harry
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
It'll fit but you need to both remove the bulb and tape over the inside of the warning light - take the cluster apart for that because even with the bulb out, the airbag light still glows slightly. The horn wiring can be a pain in the arse. You need to snip the horn connector from the old steering wheel and solder the brown power wire to the slip ring contact and earth the other side.
-
sweep
- Married to the E30 Zone

- Posts: 10112
- Joined: Sat Mar 15, 2008 11:00 pm
- Location: spares & repairs in sheffield
so it will fit on to the colum and bolt up on early and later cars?
