Indicator issue

[maf260]

My left-hand indicators don't work. There's a fast clicking noise, the same as when a bulb has gone. No bulbs on the left hand side light up when indicating left, but all bulbs light up when I press the hazard switch, so I know it's not a blown bulb. Right hand indicators work fine. Can anyone direct me where to look next please?

Thanks

[trojen]

I had the same issue, i replaced bulbs, relays etc but it turned out to be the indicator stalk.

Swapped it over with a spare and now works a treat.

[Brianmoooore]

Almost certainly the stalk. Use a piece of wire to short together the blue/red and green/yellow at the stalk's plug to confirm.

[maf260]

Thanks for the advice. I'll check at the weekend and buy a replacement stalk.