Another 5 lug question
Moderator: martauto
-
jasso
- E30 Zone Regular
- Posts: 531
- Joined: Tue Mar 28, 2006 11:00 pm
Hi guys my mate has a pair of front e30 m3 wheel hubs, my question is will they fit the 325i struts? If not why not, is it the diameter of the stub?
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
jasso
- E30 Zone Regular
- Posts: 531
- Joined: Tue Mar 28, 2006 11:00 pm
I have seen that link before the only part I can't get hold of is the m3 struts, will the m3 hubs go staight on to the non m3 struts if so that's the main concern
-
pacerpete
- E30 Zone Team Member
- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
No they will NOT fit. Strut spindle size / bearing inner race are incompatible.
-
jmc330i
- Engaged to the E30 Zone
- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
No, the E30 M3 front hub/bearing assembly will not fit a non-M3 strut. Different size bearings etc.jasso wrote:I have seen that link before the only part I can't get hold of is the m3 struts, will the m3 hubs go staight on to the non m3 struts if so that's the main concern
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
jasso
- E30 Zone Regular
- Posts: 531
- Joined: Tue Mar 28, 2006 11:00 pm
So the strut spindle on the m3's have a bigger diameter I take it? That's what I wanted to confirm.
-
jasso
- E30 Zone Regular
- Posts: 531
- Joined: Tue Mar 28, 2006 11:00 pm
Have I understood that right?