drum brakes to disc's.
Moderator: martauto
-
spiderman
- E30 Zone Newbie

- Posts: 63
- Joined: Mon Jan 30, 2012 11:00 pm
I want to convert my pre facelift e30 320i from drum brakes to discs. Do I have to change the complete arm or just brake assembly. If so will touring arms, or cabby arms fit, or cabby arms(one of each in local scrap yard), or go gor 325 setup.thsnks in advance for advice.
-
wullie325i
- CAUTION - unreliable trader!
- Posts: 1398
- Joined: Wed Jul 27, 2005 11:00 pm
full 325i rear beam with all the gubbins is what you need
-
Speedtouch
- Old Skooler

- Posts: 14123
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
AFAIK, all the Tourings had the 325i rear discs as standard. 
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Tourings and convertibles both use disc on the rear which is exactly the same as any other rear disc E30. The only difference is the tourings have larger calipers so if you have the choice of a set with calipers, go with the touring for sure.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Everything, including the parts list, is outlined here:
http://www.e30zone.net/e30zonewiki/inde ... conversion
http://www.e30zone.net/e30zonewiki/inde ... conversion
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
