Drivers Window Switch

[Pal318is]

My drivers window had stopped working. I've checked the fuses and swapped over the switches too, however this has still not fixed the issue.
Any ideas as its getting colder

Thanks

[polsta]

regulator, and or the motor in it

[Pal318is]

Will give it go today, I can't remeber what regulator it is, but have a diagram

Thanks

[polsta]

a regulator is the big scissor thing with motor on it, that lifts the window- door card off have a look, see if the teeth are worn etc

[Pal318is]

Thanks bud

[scallyally]

Door loom connector in A pillar may be corroded, I removed rubber cover and sprayed pins with W-D40.

It helped. (I couldn't remove plug, might search the wiki)

[Pal318is]

I've checked the regulator and the motor and they both work fine. I've got the window back up, by using a battery and connecting it directly to the motor.
Will check the a pillar tomorrow, thanks for the info. I've checked the wiki and tried the tips on there already, but no help.

Thanks

[Pal318is]

Typically the switch has now started to work