Since we got Smokey on the road with the current engine, I've had problems with my heaters doing what they should do.
When driving.. even on hot setting, they blow cold... when not moving, it blows heat.
I have no airlocks & We changed the thermostat yesterday... this didn't change anything. However when set to hot for a long period, it makes a tapping noise?
When the engine was in the donor car, it rarely ever went over 1/4 on the temp gauge.
I noticed that 90% of answers relate to the heater pipes being on the right way. Mine are cyclinder head to the top heater matrix. Is this correct?
Any ideas on how to get my heat back?
Heater blowing cold
Moderator: martauto
-
Gregg83
- E30 Zone Newbie
- Posts: 17
- Joined: Thu Apr 19, 2012 11:00 pm
I was having the same problem, found this yesterday.
http://www.r3vlimited.com/board/showthread.php?t=203038
http://www.r3vlimited.com/board/showthread.php?t=203038
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
No!GemE30 wrote: Mine are cyclinder head to the top heater matrix. Is this correct
-
GemE30
- E30 Zone Regular
- Posts: 930
- Joined: Sat Jun 05, 2010 11:00 pm
- Location: Notts
What is then? 
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
There's only a choice of two! If the way you have it is wrong, then .............GemE30 wrote:What is then?