Hi guys,
I've replaced my blower, thinking that was the initial problem, as it stopped working. It had been blowing intermittently and then just stopped.
Any thoughts?
Thanks
Heater not working..
Moderator: martauto
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
SilverShadow
- Hartge Crew
- Posts: 1362
- Joined: Sun Jan 16, 2005 11:00 pm
- Location: London
Kida pal!
Check your heater resistor!
You access it through the engine bulk head!
A good clean with WD40 normally sorts it out!
Check your heater resistor!
You access it through the engine bulk head!
A good clean with WD40 normally sorts it out!

-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Kidha Yaar, will give it a go bro.SilverShadow wrote:Kida pal!
Check your heater resistor!
You access it through the engine bulk head!
A good clean with WD40 normally sorts it out!
Thanks!
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
if it is no good i have some working blower resistors here .

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Cheers Mickmagpie wrote:if it is no good i have some working blower resistors here .
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
