Would someone please take a picture of an Electric window regulator fitted to a two door. I want to see how its fitted to the inside of the door. I have two regulators and the door glass but My doors must be from the earlier models so want to see what is involved in fitting the new type regulators or if its even possible
Davy
door picture
Moderator: martauto
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
you need to make one or two holes larger [elongate <<< 7 accross lol] but it's more than doable
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Davymc
- E30 Zone Newbie
- Posts: 39
- Joined: Mon Jul 15, 2013 11:00 pm
Come on guys, someone must have a picture on there pc.
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
google images ?
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
This page has a photo of a door, with all the mechanism fitted behind it so it's impossible to see. Not sure what you expected, to be honest.
http://www.e30zone.net/e30zonewiki/inde ... ont_window
Bear in mind that the pre- and facelift motors have different looms, so you'll have to chop up the wires if you're planning on fitting a newer system to an older car
http://www.e30zone.net/e30zonewiki/inde ... ont_window
Bear in mind that the pre- and facelift motors have different looms, so you'll have to chop up the wires if you're planning on fitting a newer system to an older car
'89 325i Touring | Touring Resto Thread | In-Dash Screen install