dealer plates
Moderator: martauto
-
SteSE
- Heading for the Naughty Room
- Posts: 1477
- Joined: Sun May 21, 2006 11:00 pm
- Location: Gatwick
Do you have the e36 m3 sticker for the fuel guage stating to only run 98 RON?
-
pukar
- E30 Zone Addict

- Posts: 2225
- Joined: Tue Sep 08, 2009 11:00 pm
yes. i think i have 1 in stock.
http://www.pukardesigns.com/#!bodywork/c2pr
a bit like the white one here, but clear and 98 ron with slightly different spacing.

http://www.pukardesigns.com/#!bodywork/c2pr
a bit like the white one here, but clear and 98 ron with slightly different spacing.
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Need you to remake a door shut sticker atul. I'll pm u later mate.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
Just seen this!
I need to find out what dealer mine came from!
I need to find out what dealer mine came from!
The Internet - It has proven to be worthless, and is nothing but a repository for perverts.
IG - bab91
IG - bab91
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
just sent you an e mail Atul, 
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
-
pony
- I have been misbehaving and am sorry !
- Posts: 6620
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: London
I didn't realise BMW Cotswold Cheltenham had been around since 1990 
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Yer, I keep meaning to ask them if they have any info on the car when I call them up for parts - keep forgetting !
-
pukar
- E30 Zone Addict

- Posts: 2225
- Joined: Tue Sep 08, 2009 11:00 pm
broken plates!! i will get on it mate, no problemo jim.....one slight note is that i cannot print the borderline as close to the edge as you have in your plates. the end result will actually look a bit better actually and much more even, but it is just a restriction. the line will be in the position of the sytners one as seen above. i will get it thicker though and closer to your writing as in the original. 
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Great, thanks Atul 
-
pony
- I have been misbehaving and am sorry !
- Posts: 6620
- Joined: Sat Feb 11, 2006 11:00 pm
- Location: London
I may in the future be interested in some "BMW Park Lane" number plates for the M3 CS with the 2006 font.
I have taken some photographs from a E91 3 Series Touring LB56 XXX which has BMW Park Lane number plates for you to replicate
I have taken some photographs from a E91 3 Series Touring LB56 XXX which has BMW Park Lane number plates for you to replicate
-
pukar
- E30 Zone Addict

- Posts: 2225
- Joined: Tue Sep 08, 2009 11:00 pm
that should be easy enough, if you take a peep at the plates above for the alpina register
lot, they use the modern thinner font and i have all the correct 3D logos as well.
i can also incorporate the GB EU flag as well. unlike most other plate makers, you will notice that the GB writing and the EU stars on the yellow plate are actually white and not yellow which is more effort on my part but gives a better finish imo. can also do legal 3D font as well. i will not do a playboy bunny in pink on the side though....sorry mate
lot, they use the modern thinner font and i have all the correct 3D logos as well.
i can also incorporate the GB EU flag as well. unlike most other plate makers, you will notice that the GB writing and the EU stars on the yellow plate are actually white and not yellow which is more effort on my part but gives a better finish imo. can also do legal 3D font as well. i will not do a playboy bunny in pink on the side though....sorry mate


