Heater problems
Moderator: martauto
-
Millhouse
- E30 Zone Newbie
- Posts: 105
- Joined: Tue Aug 06, 2013 11:00 pm
Very noisy heater and only works on 2 and 4 can I just give the fan a oil ?
-
Rich320I
- E30 Zone Camper
- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
yes, the bearings run dry. easy to do, just remove the cover panel and the fan is obvious. grease it up properly and away you go. there is a guide in the wiki on locating and removing the fan if you get stuck.
-
Millhouse
- E30 Zone Newbie
- Posts: 105
- Joined: Tue Aug 06, 2013 11:00 pm
What about the fan speed ? As only working on 2 and 4
-
Rich320I
- E30 Zone Camper
- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
it is most likely as described above,
read this for more information
http://www.e30zone.net/e30zonewiki/inde ... nly_on_Max
read this for more information
http://www.e30zone.net/e30zonewiki/inde ... nly_on_Max
-
Millhouse
- E30 Zone Newbie
- Posts: 105
- Joined: Tue Aug 06, 2013 11:00 pm
Cheers helped a lot time to get the tools out I think
-
Millhouse
- E30 Zone Newbie
- Posts: 105
- Joined: Tue Aug 06, 2013 11:00 pm
Ok so update
Changed the fan for a nice quite one and the resister all worked fine then nothing so looked and looked again fuse blown so replaced and now the fan is only working on 4 the resister was from BMW so not a cheap one I no the fan works so what else could be making it just work on speed 4 ?
Changed the fan for a nice quite one and the resister all worked fine then nothing so looked and looked again fuse blown so replaced and now the fan is only working on 4 the resister was from BMW so not a cheap one I no the fan works so what else could be making it just work on speed 4 ?