If the winds in the right direction and you listen carefully you will be able to hear me cursing blunt drill bits.
which me luck, I'm going in.....
Moderator: martauto
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
...today the cabby gets a towbar
If the winds in the right direction and you listen carefully you will be able to hear me cursing blunt drill bits.
If the winds in the right direction and you listen carefully you will be able to hear me cursing blunt drill bits.
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
I hope you are fitting a proper one, not some Witter wrongness !
PS I have both original types in stock for sale, fixed swan neck and detachable ,COMPLETE with all fittings
PS I have both original types in stock for sale, fixed swan neck and detachable ,COMPLETE with all fittings
-
FinalD
- E30 Zone Camper

- Posts: 1098
- Joined: Wed Apr 25, 2012 11:00 pm
- Location: Bristol
Tow bar...on a cabbie...sir, you are mad! 
1988 325i Cabriolet - Gone.
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
total and utter witter type wrongness pete, but it was very cheap and complete with twin electrics 
Holes now drilled and about to trial fit
Holes now drilled and about to trial fit
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If this is on a six pot, don't forget to connect the tail and brake lights up to the wiring before the bulb check module.
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i hate caravans !

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
It's to tow a 5 x 3 trailer, our camping gear won't fit in the boot.
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
The cabbie will distort and snap on the first hard corner. 
The Internet - It has proven to be worthless, and is nothing but a repository for perverts.
IG - bab91
IG - bab91
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
I don't know about Witter wrongness but i've got an E34 towbar on my Touring, require the addition of an extra cross member welded in behind the rear valance. But it was all freepacerpete wrote:I hope you are fitting a proper one, not some Witter wrongness !![]()
PS I have both original types in stock for sale, fixed swan neck and detachable ,COMPLETE with all fittings

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
stew72
- E30 Zone Regular

- Posts: 653
- Joined: Fri Dec 02, 2011 11:00 pm
this one bolts through the rear valance, 2 points above the boot floor, 4 below and 3 points in the spare wheel well. Seems strong enough to tow a small trailer but I wouldn't tow a caravan with it. Only problem is that the tow ball is 60 - 70mm higher than on my scenic which means the trailer sits a quite a steep upward angle when unladen. I suspect that will change once boot and trailer are loaded.
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
Id would have bought one of Pete's ones.
Ive got one and it tows a small trailer well.
Ive got one and it tows a small trailer well.
