ProSport Coilovers. Camber adjusters

Post Fri Jul 12, 2013 11:57 pm

Hi, don't normally post up, I'm more of a reader. But I need some help. Hope someone can help me.

I've bought a set of pro sport coilovers for my e30. I want to fit a set of camber adjusting top mounts at the front and poly ones in the rear. Just not sure if I can buy the top mounts and fit them right to the coilovers or will I need to strip anything off the original struts. These are the mounts I was looking at

Front:
http://bit.ly/12kL79e

Rear:
http://bit.ly/1bvMw4S

And if anyone is interested in a full bilstein B8 set up let me know. ;)

Thanks in advance.

Post Sat Jul 13, 2013 12:22 am

be intrested in the B8's drop me a PM with some details

Post Sat Jul 13, 2013 12:36 am

You're going from a set of Bilstein B8s to a set of pro sport coilovers?

Post Sat Jul 13, 2013 9:39 am

M1ke30 wrote: Rear:
http://bit.ly/1bvMw4S

If you think these are going to have the slightest effect on rear camber, toe, or anything else, you will be sadly disappointed!
The most they will do is increase the potential for cracked bodywork.

Post Sat Jul 13, 2013 6:22 pm

Not going to touch the rear top mounts, just going to use the original ones. However I'm still a bit stuck for the front top mounts, not sure what to use.

The problem with the Bilstein B8's is you can't lower them any more that what they are. The ride is outstanding I have to admit. But just want some more lows.

so going for coilovers. (On a budget)

Post Sat Jul 13, 2013 6:40 pm

Are the B8's new?