fitting purple tag 067 e46 rack

[smithysmith]

I'm fitting an e46 rack to my iS would like some definitive answers. i have used the search but there are loads of contradictions in different threads.

Can i use the e46 track rods and ends? Wiki says yes but a thread on here says no. If not can i use e46 rods with e30 ends?

Do i need 8mm spacers under the crossmember as the wiki says or 14mm as ive read on a few threads?

Do i actually need the pas cooler loop in the return line? Loads of different opinions on this.

Thanks in advance.

[DanThe]

You cant use the E46 rods. Use complete E30 track arms

Dont put anything under the rack, you need to space it down

You dont need a cooler. Ive never known one to overheat and ive fitted them to E36 M3's that race in the kumho championship without coolers or problems.

If you want to make a proper job of it and make it easier I make custom pipe kits to fit the E30





Comes with alloy rack spacers and new sealing washers

[smithysmith]

Cool, thanks for that. PM coming your way.

[jamlid]

How much do you charge for that kit?

[gromgsxr]

I had a kit for a m20 engined car off Dan the fitted perfect wicked bit of kit shoot him a pm

[Rav335uk]

You cant use the E46 rods. Use complete E30 track arms

Dont put anything under the rack, you need to space it down

You dont need a cooler. Ive never known one to overheat and ive fitted them to E36 M3's that race in the kumho championship without coolers or problems.

If you want to make a proper job of it and make it easier I make custom pipe kits to fit the E30





Comes with alloy rack spacers and new sealing washers

Still waiting for mine Dan..

[DanThe]

Sorry Rav, didnt I tell you I need money before I hand out parts?