Ht leads
Moderator: martauto
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
Hi guys. I'm in need of a set of new ht leads for my 325 cabby. Where is a good place to get some on a Saturday locally in Bedfordshire anyone ? Also any to steer clear of ?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Yes! Anything except the genuine items from BMW.gingerrusta wrote: Also any to steer clear of ?
It's very unusual to find a genuine lead that has deteriorated from new, except where some idiot has been yanking the caps off of the plugs by the wires, so the best route is to obtain a second hand set, which will have the ident sensor fitted to lead #6, unlike most aftermarket stuff.
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
Any ideas where I can get a good set on a Saturday ?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Quick ad. in 'parts wanted', or a trip to a local scrappy.
What's happened to the ones you have?
What's happened to the ones you have?
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
It's a bit weird but at weekend she was running a dream then Sunday started missing. Disconnected battery thinking it might of picked up some fault and was trying to compensate for it over fuelling. Started her tonight and checked the leads and 1 -2 didn't seem to be sparking as well as they should . I put new plugs in as well as the old ones ( which weren't that old ) were black.
My mechanic man said probably best to get another set of leads.
My mechanic man said probably best to get another set of leads.
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
Are the 320 the same as 325 leads ?
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
When I say 1 and 2 they were the leads nearest the dizzy cap. I have a set off a 320 so could try swapping the baddies .
If you are at any of the shows Brian moooore I would like to buy you a beer for your help. You are a true e30 guru
If you are at any of the shows Brian moooore I would like to buy you a beer for your help. You are a true e30 guru
-
hazd31
- E30 Zone Squatter

- Posts: 1689
- Joined: Sat Feb 07, 2009 11:00 pm
- Location: west sussex, nr brighton
yes get genuine, mine had aftermarket on, I replaced them with after market twice after developing misfires over time (one set lasted a week) before putting on a set of original 1986 ones off my e28, still running like a dream
Get yoyrself down the scrappy!
Get yoyrself down the scrappy!
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
Are they a lot from BMW ?
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
A lot more than aftermarket....
I had a similar experience. I measured the resistance of my leads and was shocked to find them over 6500ohms. Then when I took them off I realised they were aftermarket
I had a similar experience. I measured the resistance of my leads and was shocked to find them over 6500ohms. Then when I took them off I realised they were aftermarket
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
gingerrusta
- E30 Zone Regular

- Posts: 527
- Joined: Fri Jul 31, 2009 11:00 pm
- Location: Bedfordshire
I'm going to BMW tomorrow so will get a price . Will try replacing the leads in question to see if I can get by then. Going to Surrey Sunday so wanting her to be ok for the run.
-
Speedtouch
- Old Skooler

- Posts: 14123
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
As long as they are below around 10,000 ohms, they should be OK to use.Morat wrote:A lot more than aftermarket....
I had a similar experience. I measured the resistance of my leads and was shocked to find them over 6500ohms. Then when I took them off I realised they were aftermarket
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Billwill
- E30 Zone Regular

- Posts: 363
- Joined: Sun Jun 26, 2011 11:00 pm
- Location: South Africa
This is true 6,500 ohms is not a problem...unless you are using these leads with resistive end caps which I have seen before!Speedtouch wrote:As long as they are below around 10,000 ohms, they should be OK to use.Morat wrote:A lot more than aftermarket....
I had a similar experience. I measured the resistance of my leads and was shocked to find them over 6500ohms. Then when I took them off I realised they were aftermarket
-
zd3bx
- E30 Zone Regular

- Posts: 638
- Joined: Sat Apr 06, 2013 11:00 pm
- Location: London
I'm pretty sure this is the part number > 12 12 1 720 529
If so, then it comes up at £267.42 at BMW Cooper.
I've got aftermarket leads made by BBT, bought from GSF. Around 90 quid, I think. No complaints so far, but I had them for less than a year.
If so, then it comes up at £267.42 at BMW Cooper.
I've got aftermarket leads made by BBT, bought from GSF. Around 90 quid, I think. No complaints so far, but I had them for less than a year.
