Engine Wont Start 318i
Moderator: martauto
-
OakieBoi
- E30 Zone Newbie
- Posts: 1
- Joined: Thu May 23, 2013 11:00 pm
After fitting lowering springs and driving out of the garage Ive hit a metal pole, and broken the engine mounts, now Ive snapped a black bosch wire, and Im not sure where it connects to, the ignition all turns on and the car will not start if anybody coudl help would be great thanks
-
Grrrmachine
- E30 Zone Wiki / Team Member
- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
That's karma for you 
Do you have spark and fuel? And what makes the wire a "Bosch" one?
Do you have spark and fuel? And what makes the wire a "Bosch" one?
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Billwill
- E30 Zone Regular
- Posts: 363
- Joined: Sun Jun 26, 2011 11:00 pm
- Location: South Africa
Is this an M40 318i?
Where is this connector located...a picture would help a lot.
Probably the crank sensor which sits below the engine up front.
If you lower a M40 E30 you definitely need a good strong metal sump guard fitted.
Where is this connector located...a picture would help a lot.
Probably the crank sensor which sits below the engine up front.
If you lower a M40 E30 you definitely need a good strong metal sump guard fitted.