e30 m3 replica 9k
Moderator: martauto
-
Jimbob
- E30 Zone Addict

- Posts: 3731
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Poole
Fair bit of effort gone into that.
-
Osamam3
- E30 Zone Regular

- Posts: 547
- Joined: Wed Dec 05, 2012 11:00 pm
has anybody on here tried this swap ? I mean it's already 231 bhp on tap instead of trying to harverst it from the m52 or is the wiring / ecu stuff tough ?
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
E46 330ci 3.0 lt engine, ports opened out for M50 2.5 (e36) manifold, converted to single vanos, running on M52 2.5(later e36) non EWS single vanos ecu/maf etc. rolling roaded without a remap at 251 bhp.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Jimbob
- E30 Zone Addict

- Posts: 3731
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Poole
Don't want to rip it to shreds but could just be a 3ltr crank swap.
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
And ill drink cat piss if it makes 251bhp.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
kangman
- E30 Zone Squatter

- Posts: 1935
- Joined: Mon May 24, 2010 11:00 pm
- Location: Heathrow
Sounds like a big job compared to a m52 conversion
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Sounds like a very odd combo, that lump would have the "cathedral" ports so would have taken a later 330ci manifold with no issues, with that it would have done 260 but not so sure with the ports massaged and an m50 manifold, sounds like a step backwards.
Other than that it is a stunning job of the replica.
Other than that it is a stunning job of the replica.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Fastroad
- E30 Zone Addict

- Posts: 2405
- Joined: Mon Oct 22, 2007 11:00 pm
Good looking replica. If it was LHD it would fool most as being an original M3
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
looks good.
shame about the mirrors and bent mot
shame about the mirrors and bent mot
cheers,
harry
harry
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
It's probably a ringer
-
penton08
- E30 Zone Camper

- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
EFAkangman wrote:Sounds like a m52 conversion
-
TPS
- E30 Zone Team Member

- Posts: 13119
- Joined: Fri Mar 06, 2009 11:00 pm
- Location: Hampshire
It wouldn't surprise me.Kos wrote:It's probably a ringer

1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Kos wrote:It's probably a ringer
Its not. I met the guy who built it and sold him some bits
-
Fastroad
- E30 Zone Addict

- Posts: 2405
- Joined: Mon Oct 22, 2007 11:00 pm
Pete has the knowledge of the build, so could be a good one for a different engine
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
'ringer' is usually my first thought when you see a replica that's a bit too good, as sad as that is.
However, i wouldn't expect a rung, rhd converted proper m3 to be using compact rear arms, or to have retrofitted a normal lockstrip fitting front windscreen.
However, i wouldn't expect a rung, rhd converted proper m3 to be using compact rear arms, or to have retrofitted a normal lockstrip fitting front windscreen.
cheers,
harry
harry
-
smithysmith
- E30 Zone Regular

- Posts: 356
- Joined: Sat Oct 17, 2009 11:00 pm
- Location: Fairford
Looks like one of the best ones I've seen. Crying out for an s50.
-
death
- E30 Zone Newbie

- Posts: 231
- Joined: Tue Oct 07, 2008 11:00 pm
1+Kos wrote:It's probably a ringer
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
Guessing you've not read the above posts?death wrote:1+Kos wrote:It's probably a ringer
Looks a decent car and reasonably priced TBH, with what it cost to do the conversion + paint etc. Assuming it is done properly and is a tidy motor.

-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
Years ago there was a red 318is M3 replica on eBay which was a ringer.
-
kangman
- E30 Zone Squatter

- Posts: 1935
- Joined: Mon May 24, 2010 11:00 pm
- Location: Heathrow
Do you ever say anything nice you grumpy git, you fo0king called my car a turd to my faceKos wrote:It's probably a ringer
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
-
kangman
- E30 Zone Squatter

- Posts: 1935
- Joined: Mon May 24, 2010 11:00 pm
- Location: Heathrow
Nicely played Diable 
He calls everyones car a turd the C11cNT
He calls everyones car a turd the C11cNT
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
All cars are turds but my turds are birthed from the aftermarth of an Alabama hot pocket which makes them specialkangman wrote:Nicely played Diable
He calls everyones car a turd the C11cNT
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
But HIS actaully is the CUNTkangman wrote:Nicely played Diable
He calls everyones car a turd the C11cNT

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
There was, it kept getting relisted on eBay.Kos wrote:Years ago there was a red 318is M3 replica on eBay which was a ringer.
If its the car I think it is then I know a bit about the history.

-
Fastroad
- E30 Zone Addict

- Posts: 2405
- Joined: Mon Oct 22, 2007 11:00 pm
I remember that. Did come to mind when I first saw this.Kos wrote:Years ago there was a red 318is M3 replica on eBay which was a ringer.
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
When it was on eBay it was running a 4 lug set up
-
mr_dink
- E30 Zone Regular

- Posts: 812
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Huddersfield
Yep, this is that one. I saw it in progress and had the original M42 engine out of it in my old 2 door!pacerpete wrote:Kos wrote:It's probably a ringer
Its not. I met the guy who built it and sold him some bitsIIRC he was from Nottingham and was a BMW specialist / breaker.
Can't be many out there with porsche brakes. Was definitely done to a high standard and with all original panels.
Engine is definitely running M52 management. Either the current owner or the one before posted on here about it as he was having trouble locating a thermostat housing as the one on it had a sensor of some sort fitted in it.
-
mr_dink
- E30 Zone Regular

- Posts: 812
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Huddersfield
Can't be the same one. This has had the porsche brakes and 5 lug since it was converted.Kos wrote:When it was on eBay it was running a 4 lug set up
-
CL
- E30 Zone Newbie

- Posts: 52
- Joined: Sun Dec 10, 2006 11:00 pm
Do you guys think this is worth the money he is asking for it? I like it, alot!
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Its a narrow market of buyers so its only worth it to someone that really wants what looks like a well built rep.
I doubt you could build the same spec car for less.
I doubt you could build the same spec car for less.
-
CL
- E30 Zone Newbie

- Posts: 52
- Joined: Sun Dec 10, 2006 11:00 pm
Thank you Rtaylor. Very good point. My friends are suggesting it's too much money from a residual perrspective - definitely looks like a well built example, I love it!
-
CL
- E30 Zone Newbie

- Posts: 52
- Joined: Sun Dec 10, 2006 11:00 pm
Also, and this could just be me, but the rear looks a bit odd, anyone else see anything funny looking?
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
Nope, just needs the black stripe on the bumpers. The lid looks a little bare without an m3 badge, but its nice that he's left them off.
As for value, then no doubt it cost more to build. I wouldn't pay anywhere near that though. £6k maybe at a push, but for near on ten grand I'd rather have a scruffy real m3 which needed a little tlc than a mint 318is based replica.
As for value, then no doubt it cost more to build. I wouldn't pay anywhere near that though. £6k maybe at a push, but for near on ten grand I'd rather have a scruffy real m3 which needed a little tlc than a mint 318is based replica.
cheers,
harry
harry
