What did you do to your E30 today?

[pacerpete]

Collected a morselled up LPG'd 325 shooting break yesterday from Porstmouth , detoured to the Surrey meet on the way back for some horse'n'hating and got home without any dramas or having to put any fuel in the turd

Done a quick autopsy/ morsel count today and took pics ready to serve some of the tasty treats !

Then I worked on scrap and a nice mans nice 325 sport

[ImysE30]

took it out of storage

Chrome deviant's back

Dreamt about mine today

[magpie]

blew it up on the m3

oh dear

[daimlerman]

Nope

How are you doing,chomiebabe?

[clipper]

Swapped my old worn and binding Girling calipers for a nice fresh set of ATE items off a breaker.
Goodbye embarrassing squeaks and clunks, hello smooth silent braking.
On my way home from the test run a little girl ran out in front of me. Reckon it was her lucky day!

[clipper]

Swapped my old worn and binding Girling calipers for a nice fresh set of ATE items off a breaker.
Goodbye embarrassing squeaks and clunks, hello smooth silent braking.
On my way home from the test run a little girl ran out in front of me. Reckon it was her lucky day!

[sanitroc1]

changed front strut , bottom arm , front flexi brake pipe and both handbrake cables . Fixed the wiper stalk so that I have slow speed again and got all the rear lights to work . Mot Tuesday fingers crossed .

[e30-EVN]

re-fitted the m52 on my own !

been there

stripped the boot liners out, found a small rust patch in spare wheel well that just needs a small plate.
jetwashed the car,, getting her ready for the next engine transplant

[andrew_baran]

Moved my 320 for the first time on its new coilovers, wheels and b25 engine - my first engine swap!
Dead rewarding moment when it pulled out of the garage - even if it is missing a few body panels...

[Automaton]

Searched for a K&N kit on Ebay UK.
Learnt that Brilliant rot is spelt as B R I L L A N T R O T. No 'i' in between. Germany here I come.

[bab-91]

Was cleaning clutter out of the garage.

A neighbors cat took a nap in the car while i was away.

I chased it & during its escape it knocked over the glass jars of my organised bolts and screws.

Now all my bolts and screws are one big mess which will make putting the car back together that bit more difficult, f**king f**k f**k

[magpie]

finally completed the m52 swap and took it out for a full on shakedown

[Topblag]

finally completed the m52 swap and took it out for a full on shakedown

Good stuff Mick, happy man ?

[magpie]

finally completed the m52 swap and took it out for a full on shakedown

Good stuff Mick, happy man ?

sat shaking with a big smile

[Automaton]

Ordered the K&N bolt in kit, expected 25 June from Amazon.
Checked progress, the steering rack is back from turner, all cleaned up, with new rubber boots and leaks repaired.

[e30-EVN]

sat shaking with a big smile

i miss drivin my m52'd sleeper but some things have gotta be done (newborn)

but am hopin a nicely built eta 2.7 on a short dif will provide tempary shits n giggles until i get my head into the sr20det

[beemerbird]

Like most days, I drove it. I did however get the 'low washer fluid level' light on today which makes it a slightly unusual day

[Gert_8]

Collected the bitch after it's MOT. Had to store it in one of our warehouses until I get some road tax tomorrow. It will also give me some space to work on it...! Could do with a wash and polish.

I'll apologise for the wheels, but these are going to be up for sale and replaced with the BBS'

[hennabm]

Yesterday and today worked on the 323i - new rear discs and renew cambelt, tensioner, spring and viscous fan. Well, I will replace the viscous fan when it arrives from Germany.

Apparently Germany shut down for a week not long ago to install a new computer system and are still catching up with back orders

[Topblag]

Yesterday and today worked on the 323i - new rear discs and renew cambelt, tensioner, spring and viscous fan. Well, I will replace the viscous fan when it arrives from Germany.

Apparently Germany shut down for a week not long ago to install a new computer system and are still catching up with back orders

Germany is also enjoying some flooding, which tends to take out computer systems which are housed in basements with no flood protection measures.

[beemerbird]

I ran over a rat in Tesco's carpark.

[Gert_8]

I ran over a rat in Tesco's carpark.

Was Pacerpete hurt?! I know he often shops there....

And at lidle

[AndyZippy]

finally completed the m52 swap and took it out for a full on shakedown

Good stuff Mick, happy man ?

sat shaking with a big smile

Well done Mick!

I've spent my afternoon taking the M52's Exhaust Manifolds & Loom off to send to Danthe - However, removing the Lambda sensors from the manifolds is currently making a fool out of me - Neglected to soak 'em like i did the manifold nuts yesterday!!

[DanThe]

Good stuff Mick, happy man ?

sat shaking with a big smile

Well done Mick!

I've spent my afternoon taking the M52's Exhaust Manifolds & Loom off to send to Danthe - However, removing the Lambda sensors from the manifolds is currently making a fool out of me - Neglected to soak 'em like i did the manifold nuts yesterday!!

Leave em on of you like

Not touched my E30's at all this year apart from charging the battery

[Fastroad]

Replaced faulty ABS sensor and now I have a whole list of little annoying things for the weekend.....the joy of an E30

[e30_mtec]

Got a set of rs 16

[Rav335uk]

Got a set of rs 16

Which ones??????

RS 003's for the E30???

[pukar]

i contemplated selling it

[kangman]

What front valance have you got fitted? no tech2?

[e30_mtec]

Got a set of rs 16

Which ones??????

RS 003's for the E30???

Yea .. need to do a 5stud conversion .....

[e30_mtec]

[Automaton]

Dusty country kills all thoughts of owning an intricately patterned BBS.

Alpina it is for me. Or a simple 5 spoke.

[Rav335uk]

I don't think Alpina wheels would last long on Indian roads

[Automaton]

Ok, I can't afford to import BBS or Alpina, anyway, any suggestions on what goes well with a black car and lots of chrome? Classic 4 bolt pattern that would be easy to keep clean.
Else, going to paint the steel wheels and find a cap like the one I saw on the 518 thread.

[Gert_8]

@ Kangy. I don't know mate, it came with the car. Certainly isn't a tech 2, which I would like at some point. Just some fibre glass shite for the moment.