Any other jobs needed
Moderator: martauto
-
xavier
- E30 Zone Regular
- Posts: 743
- Joined: Thu May 29, 2008 11:00 pm
- Location: Western Australia
I am going to replace the master and slave clutch cylinders. While I have my head under the dash and gearbox is there anything else worth replacing?
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Nothing else to replace, but you could check the adjustment of the brake pull rod. Adjust it so that the brake pedal is just short of hitting its upper stop.
-
milescook
- E30 Zone Camper
- Posts: 1285
- Joined: Thu Jan 13, 2011 11:00 pm
- Location: The 'bran of Cwm
If you haven't considered the wiki, there's some top tips in there http://www.e30zone.net/e30zonewiki/inde ... _Cylinders
The story so far... http://www.cookracing.co.uk/
Also please help the race budget by watching some videos
https://www.youtube.com/cookracinguk
Also please help the race budget by watching some videos
https://www.youtube.com/cookracinguk-
G-Bear
- E30 Zone Squatter
- Posts: 1631
- Joined: Wed Mar 12, 2008 11:00 pm
- Location: Hertfordshire
When I did my clutch cylinders. I changed the probable tired hose that ran to the slave. Got a braided one instead of the original rubber one.
-
xavier
- E30 Zone Regular
- Posts: 743
- Joined: Thu May 29, 2008 11:00 pm
- Location: Western Australia
Where can I get one these braided lines from?
-
G-Bear
- E30 Zone Squatter
- Posts: 1631
- Joined: Wed Mar 12, 2008 11:00 pm
- Location: Hertfordshire
Pick a colour. You'll have double check its the right one but I would assume (don't quote me on it) they're the same throughout all E30's, maybe accept the M3.xavier wrote:Where can I get one these braided lines from?
This one has zinc fittings. It would be best to find stainless steel fittings. But from what I remember when I got one, stainless was only available on their brake lines.
http://item.mobileweb.ebay.co.uk/viewit ... 0506718327