About to attempt....

Need technical Q/A then you're in the right place

Moderator: martauto

TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Sun Jun 09, 2013 12:28 pm

....To remove the Crank Bolt, got a long Breaker Bar, Engine is out of the Car, any top tips?, any help gratefully received!
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sun Jun 09, 2013 12:37 pm

Yes.
Eat a BIG breakfast.
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Sun Jun 09, 2013 12:38 pm

Hold on, I've had a few of them already!
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sun Jun 09, 2013 1:50 pm

Is the gearbox still connected up?
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Sun Jun 09, 2013 2:54 pm

No
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sun Jun 09, 2013 4:54 pm

All done?? :mad:
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Sun Jun 09, 2013 5:58 pm

Sorted, Thanks for your help Rav., that was on tight!
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sun Jun 09, 2013 9:29 pm

:D
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Sun Jun 09, 2013 9:41 pm

So what did you do?
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Mon Jun 10, 2013 6:22 am

The Engine was on a pallet in the garage, its scrap, I took off the sump, wedged the hammer upside down, up one of the cylinders, to stop the crank from turning. Positioned it so the Engine mount arm, was in between the wood slats, in the pallet, so it couldn't move, then with a massive breaker bar, bought for such occasions, just kept trying to undone it, took ages, eventually heard a loud dry cracking sound, undone!
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
jimbom30cab
Tech 1 freak
Posts: 7631
Joined: Mon Oct 12, 2009 11:00 pm
Location: in the garage

Post Mon Jun 10, 2013 7:32 am

Nice job :)
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Mon Jun 10, 2013 7:58 am

Told you it was easy winkeye :mad:
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL