I have just purchased some leathers for my e30 that come from a convertible but my car is a coupe will the convertible rear bench fit in, I am only new to the forum and can't find anything on this topic online so I do apologise if this has been discussed prior.
Any help will be much appreciated.
Thanks
E30 seat swap
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Rear bench is specific to each model, so you'll need to do some butchering to make the rear bench fit:
http://www.e30zone.net/e30zonewiki/inde ... rior#Seats
http://www.e30zone.net/e30zonewiki/inde ... rior#Seats
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
juicee187
- E30 Zone Newbie

- Posts: 4
- Joined: Mon Apr 01, 2013 11:00 pm
Can some one give me some tips on how to do it.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Yes. Put them on eBay and buy the proper ones for your car.
Cabby bench is narrower so you need to bulk out the gaps at the side somehow - those who have fitted them use the cabriolet rear cards to do so, but you'll have to be creative with how you mount them to the car. You'll also have to take a saw to your rear parcel shelf to compensate for the horse-shoe shape of the bench.
There's also an issue with the centre seat belt mount IIRC.
In all, it's a lot of work which 99% of the time will come out looking awful.
Cabby bench is narrower so you need to bulk out the gaps at the side somehow - those who have fitted them use the cabriolet rear cards to do so, but you'll have to be creative with how you mount them to the car. You'll also have to take a saw to your rear parcel shelf to compensate for the horse-shoe shape of the bench.
There's also an issue with the centre seat belt mount IIRC.
In all, it's a lot of work which 99% of the time will come out looking awful.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
