I'm hoping this is an easy question answer, but I have a 1990 325i with a water leak that is coming from inside the bell housing. Is their a core plug in their or is it something else?
Regards
Smithy
Water leak
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Back end of a M20 block is plain, flat, machined iron. There is, however, an alloy hose connector and hose right at the back of the head which are common places for leaks.
-
smithy0246
- E30 Zone Newbie
- Posts: 3
- Joined: Sat Nov 14, 2009 11:00 pm
- Location: burton on trent
The hose connector at the back of the head seams dry, it's what I thought first. was just asking first before I pull the I make a start in pulling the gearbox off to see
Thanks for the advise
Smithy
Thanks for the advise
Smithy