Stupid Question - Topping up ATF Fluid
Moderator: martauto
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Most likely a stupid question but is it OK to top up the ATF fluid on an autobox via the gearbox dipstick? Also I take it that its the same as the engine in that it should be between the two marks.
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
Yes. You do need a particularly small necked funnel though.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
And remember to wait a few minutes for it to settle down the tube, otherwise you may end up thinking you've brimmed it!
And follow the procedure in the owners manual. Oil at temperature, car running, in neutral after going through the gears.
And follow the procedure in the owners manual. Oil at temperature, car running, in neutral after going through the gears.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
For once something I have in my garage
When doing a complete change is this also the way to fill it or is there a fill hole on the GB? Couldn't see one when I was fitting the new engine GB mounts.
-
ranxerox
- E30 Zone Newbie

- Posts: 62
- Joined: Fri May 03, 2013 11:00 pm
delete
Last edited by ranxerox on Tue May 14, 2013 9:53 pm, edited 1 time in total.
-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
Nope, through the dipstick hole again.Rtaylor2208 wrote: When doing a complete change is this also the way to fill it or is there a fill hole on the GB?
