Ok so my downpipe is stopping my steering linkage from turning
I've done an e30 to 36 rack conversion
Do I need to space things out more or make a dent in the pipe?
e30/e36 steering ujs catching on downpipe help!
Moderator: martauto
-
Topblag
- Old Skooler
- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
Have you checked the wiki ? Pretty sure you need to use e34 ujs to clear the down pipe.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
dje30
- E30 Zone Regular
- Posts: 259
- Joined: Sun Jul 22, 2012 11:00 pm
- Location: gravesend, kent
I bought a linkage and rack off an e30 that was running the setup so should be the right ujs maybe I got confused on which ones where used
-
Bristol_Jer
- E30 Zone Addict
- Posts: 2523
- Joined: Thu Sep 24, 2009 11:00 pm
- Location: Bristol, UK
What engine have you got?
-
dje30
- E30 Zone Regular
- Posts: 259
- Joined: Sun Jul 22, 2012 11:00 pm
- Location: gravesend, kent
M40 1.8 
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
did you use the linkage i sent you ?
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
dje30
- E30 Zone Regular
- Posts: 259
- Joined: Sun Jul 22, 2012 11:00 pm
- Location: gravesend, kent
Yehhh I'm using that linkage magpie
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
dude you are having fun with this aren't you ......not 
did you make a spacer for the rack as i lost one ? i'm sure they were under the rack if that makes a difference .. it was all fitted and working ,i drove the car it came off and all was fine .
did you make a spacer for the rack as i lost one ? i'm sure they were under the rack if that makes a difference .. it was all fitted and working ,i drove the car it came off and all was fine .
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
dje30
- E30 Zone Regular
- Posts: 259
- Joined: Sun Jul 22, 2012 11:00 pm
- Location: gravesend, kent
its all fun and games mate!
the spacers for the rack where both there and i think i put them underneath will check in the morning!
the spacers for the rack where both there and i think i put them underneath will check in the morning!