oil pressure light stays on ??

Need technical Q/A then you're in the right place

Moderator: martauto

ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Wed Mar 13, 2013 7:55 am

slight little prob as title says my oil pressure light is constantly on the cars been sat since last sept oct I started it a couple of weeks ago and noticed it was on
as its been sat I just assumed that the switch had stuck so I bought a new one replaced it last night but no change light still stays on

now the weird bit is that I have a oil pressure gauge in the car and on start up it says it's up to 80-90 psi from cold I'd say is about normal and when up to temp gauge says 40-50 on idle ?

so what could it be and which one could be playing up??

cheers
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Mar 13, 2013 9:19 am

What does the light do if you disconnect the wire from the pressure switch?
If it goes out, you have a faulty switch, but if it still stays on it's likely that the wire from it is shorted to the block, somewhere around the front of the engine.
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Wed Mar 13, 2013 9:50 am

when you disconnect it it stays on thanks Brian ill look at the wire later :)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Mar 13, 2013 1:28 pm

Unplug the 20 pin C101 next to the fusebox to confirm that this puts the light out. If it does, there's definitely a short on the engine loom.
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Wed Mar 13, 2013 1:47 pm

ok will do ill try that when I get home
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Wed Mar 13, 2013 4:57 pm

I've just looked and your right Brian as usual As I put the rocker cover on in the dark I've trapped the wire and squashed it so it s all clear now it's day light thanks brian
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30