Hello,
My IS side skirts are rotten and there isn't much left of the clips, i've struggled to find any sort of similar resemblance online.
Anyone know where I can get some? Or do BMW still stock them and if so where may I find the part no.?
cheers lads
Side skirt clips and bits
Moderator: martauto
-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
http://www.realoem.com/bmw/showparts.do ... g=51&fg=20
I guess you want item 12, but someone with more knowledge of side skirts will probably be able to help you.
Should be able to order from BMW though.
I guess you want item 12, but someone with more knowledge of side skirts will probably be able to help you.
Should be able to order from BMW though.
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
No 9 I think if it's the ones that pinch the seam on the underside of the sill

-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Those are definitely the clips for SE skirts, so if that's what the iS uses then those clips will be fine.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
They are used on SE, M-tec2 and ix skirts also
-
e30kid6
- E30 Zone Newbie

- Posts: 135
- Joined: Thu Nov 10, 2011 11:00 pm
- Location: Medway
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
I know the ones you mean but not sure which they are from the diagram.
The wiki has this pdf which should have part no's: http://www.e30zone.net/e30zonewiki/imag ... Seiten.pdf
You be as well of ordering everything listed in the realoem link, you could prob do with replacing the lot if the clips and push in things are worn.
The wiki has this pdf which should have part no's: http://www.e30zone.net/e30zonewiki/imag ... Seiten.pdf
You be as well of ordering everything listed in the realoem link, you could prob do with replacing the lot if the clips and push in things are worn.
-
Captain_Birdseye
- E30 Zone Regular

- Posts: 874
- Joined: Sun Mar 25, 2012 11:00 pm
- Location: Bristol (and Cheltenham)
Your local bmw garage.
-
e30kid6
- E30 Zone Newbie

- Posts: 135
- Joined: Thu Nov 10, 2011 11:00 pm
- Location: Medway
-
j2b
- E30 Zone Regular

- Posts: 884
- Joined: Fri May 21, 2010 11:00 pm
- Location: Kent
I bought a complete set of clips from bmw in maidstone a couple of years back , price was about £25 and had to order them iirc. But obviously may have gone up slightly in price .
89 more door 6 pot
-
Tan91
- E30 Zone Regular

- Posts: 368
- Joined: Fri Jun 20, 2008 11:00 pm
- Location: West London
Yeah BMW defo, I ordered some through the BMW Parts section on here, you needs the clips in the pic above, something like 12 total or 10 5/6 each side, then you need those green grommet clips which are cheap as well
When I ordered them they cost me about £20ish, delivered to your floor mat too.
When I ordered them they cost me about £20ish, delivered to your floor mat too.
1990 - 316i LUX Coupe[/size:364a72de04]
-
e30kid6
- E30 Zone Newbie

- Posts: 135
- Joined: Thu Nov 10, 2011 11:00 pm
- Location: Medway


