Tech 1 sport exhaust manifold

Moderator: martauto

Post Reply
User avatar
Fastphil666
E30 Zone Newbie
E30 Zone Newbie
Posts: 24
Joined: Sat May 21, 2011 11:00 pm
Location: North wales

Fri Feb 01, 2013 10:07 am

I see many cheap manifolds on eBay are any any good? I have a tech 1 sport are the manifolds the same tech1/ tech2? I want a good fitment.
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire
Contact:

Fri Feb 01, 2013 10:17 am

Are you talking about Stainless versions or just the standard E30 Log manifold? If its the log manifold, any prefacelift 325i Manifold will fit as they are all the same.
User avatar
Fastphil666
E30 Zone Newbie
E30 Zone Newbie
Posts: 24
Joined: Sat May 21, 2011 11:00 pm
Location: North wales

Fri Feb 01, 2013 7:26 pm

Sorry I meant a stainless replacement. It has the log type manifold now, the manifolds you see on ebay tend to have downpipes too. These downpipes I take it join the cat pipe on face lifted bm's. as mine has no cat I was wondering if there the same fitment?
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D
Contact:

Thu Feb 28, 2013 5:26 pm

Early cast manifold is rubbish

the later post 88 with larger downpipe flange will all bolt up with matching downpipes for better flow than what you had originally

Cheap too , 6 Branch is bling- and about 1 HP if you're lucky without any further mods to suit,,,,,
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW
Kedge
Old Skooler
Old Skooler
Posts: 7702
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Thu Feb 28, 2013 5:30 pm

Usually you need to mod the cheap manifolds to get them to fit.

You get what you pay for.................
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
trenchy24
E30 Zone Newbie
E30 Zone Newbie
Posts: 7
Joined: Sat Oct 06, 2012 11:00 pm

Sun Mar 24, 2013 7:43 pm

Iv also been looking at these 'cheap' manifolds.
im in need of a 6 branch for my E28 that im putting a m20b25 into. Might be worth a punt.
Post Reply