shortened shocks

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Sun Jan 27, 2013 7:58 pm

Hey, ive got a 320i with a m50 in..running some apex xlow springs which dropped it about 60mm and im in need of some advice on the best shortened shockers for it. Front and rear
Canny Beat a chromie!'
Image
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Sun Jan 27, 2013 8:03 pm

off the shelf, bilsteins
User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Sun Jan 27, 2013 8:05 pm

B8s??
Canny Beat a chromie!'
Image
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Sun Jan 27, 2013 8:09 pm

yep
User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Sun Jan 27, 2013 8:18 pm

Sweet mate thanks. How much are they for a set for the back?
Canny Beat a chromie!'
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jan 27, 2013 9:23 pm

The B6's are the shortest, the B8's are the same length as standard dampers!
User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Mon Jan 28, 2013 7:58 pm

Ohh i got told otherwise..thanks for clearing that up
Canny Beat a chromie!'
Image
Coops90
E30 Zone Regular
E30 Zone Regular
Posts: 994
Joined: Sun Oct 21, 2007 11:00 pm
Location: Sheffield

Post Mon Jan 28, 2013 8:19 pm

For the front, E30 iX shocks are shorter than all usual E30 ones, apparently they are good for excessive lowering. And further still, i've read that Audi 80 shocks are even shorter.
Malachite uber alles
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Tue Jan 29, 2013 10:09 am

Webcat says otherwise :?

http://www.bilstein.de/en/products/high ... in-b8.html

For the e30 it's also know as Sprint
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Jan 29, 2013 12:37 pm

Kos wrote:Webcat says otherwise :?

http://www.bilstein.de/en/products/high ... in-b8.html

For the e30 it's also know as Sprint
Its been covered loads of times, im surprised you didnt know!

Simon13's picture from about 5 years ago

Image

Standard top, not at full extend due to being shagged
B6 middle
B8 bottom
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Tue Jan 29, 2013 1:07 pm

I wish bilstein would sort it out.

For every other BMW the B8 is the shorter damper or is that wrong as well ?! :mad:
User avatar
makman
E30 Zone Regular
E30 Zone Regular
Posts: 361
Joined: Thu Oct 13, 2011 11:00 pm

Post Tue Jan 29, 2013 8:01 pm

Do the audi 80 ones go into the insert section of the hub too or do they need modifying?? ilm wanting some decent not a million pound jobbys
Canny Beat a chromie!'
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Jan 29, 2013 9:44 pm

............ :roll: