Hi
My car has a bmw alarm but I don't have a key fob - occasionally I have to jiggle around the wires to make it start - is it an easy job just to remove it completely?
Thanks
BMW Alarm removal
Moderator: martauto
-
Quaser
- E30 Zone Addict
- Posts: 2622
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: West London
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Just needs patience!
Apart from the gubbins on the n/s inner wing,you should find a black box behind the glovebox,carefully trace every single wire from this to it's source,you will find that a number of them will interupt vital wires.There should be a plug that interupts a plain green wire,if you are lucky you will find an identical plug taped to the loom with a loop of green wire on it,if not,you will have to make one from the redundant alarm plug.
Expect to find wiring going to the door interior light pin switches,to a micro switch on a bonnet roller,and under the carpet to the boot pin switch.
Apart from the gubbins on the n/s inner wing,you should find a black box behind the glovebox,carefully trace every single wire from this to it's source,you will find that a number of them will interupt vital wires.There should be a plug that interupts a plain green wire,if you are lucky you will find an identical plug taped to the loom with a loop of green wire on it,if not,you will have to make one from the redundant alarm plug.
Expect to find wiring going to the door interior light pin switches,to a micro switch on a bonnet roller,and under the carpet to the boot pin switch.
Youth is wasted on the young.