Hi
I've got standard 325 sport springs on my car an I would like to put a pair of good shocks in just to get rid of some of the bounce without lowering the car! What shocks do you recommend to use with standard springs will b6's work? Any advice would be great!
Regards Neil
Front suspension
Moderator: martauto
-
B15NAC
- E30 Zone Regular

- Posts: 838
- Joined: Tue Oct 16, 2007 11:00 pm
- Location: devon/bovey tracey
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i'm running boge turbo front dampers with the same springs and m50 donk ,the ride is good 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Running Boge's the same as maggpie (GSF £57 a side), -40MM springs and M20 and it rides much better than the shagged out original shocks it was running.
-
Quaser
- E30 Zone Addict

- Posts: 2622
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: West London
I had a set of bilstien b4's and 40mm springs on my m20 touring - nice and comfortable drive
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
-
B15NAC
- E30 Zone Regular

- Posts: 838
- Joined: Tue Oct 16, 2007 11:00 pm
- Location: devon/bovey tracey
Thanks for the replys! Yea I'm running a m50 in my car on 325 sport springs an I'm happy with the hight just want to stiffen it up a bit!
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i'm sure meatballs on here can get the Boge turbo with Discount for you 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
B15NAC
- E30 Zone Regular

- Posts: 838
- Joined: Tue Oct 16, 2007 11:00 pm
- Location: devon/bovey tracey
Ok thanks I will look in to them then! Do b6's only work with lowering springs?
Regards Neil
Regards Neil
