Pic request

[shedrool83]

Anyone have any pics of a white (or any other colour) 2 door with i.s lip spoiler ,tech 1 sidekirts and tech 1 boot spoiler?

t.i.a

[polsta]

if its a facelift would look better with se side skirts

318ispmk had a red one with is lipis spoiler,and tech 1 skirts, but also had the black bumper inserts painted red,looked a bit cheap

look up his threads

[polsta]

here it is, doesnt look real bad but chrome kidney and black bumper trim and door mouldings would of gave a much nicer look

[shedrool83]

Never been a fan of colour coded bumper inserts .

It a white facelift 2 door .

I have both tech1 and se sideskirts so pics of both if possible would be great.
It currently has a white se boot spoiler .

I reckon if i do the i.s lip spoiler black colour code the sideskirts and fit a tech 1 boot spoiler it will carry on the black and white scheme along with the bumper inserts and door rub strips.

[polsta]

will look good mate, a fair few put se skirts on a 318is. adit had one like that, what color is the lower rear valance standard black or white ? may have to paint it white to look ok with the skirts particularly tech 1, not sure

heres one, looks much nicer with the se skirts

http://www.ebay.co.uk/itm/BMW-E30-320i- ... 7675.l2557

[G-Bear]

From looking at the pic above of 318ispmk's old IS and the white SE on the ebay link. I would say that the SE skirts tie in better with an IS splitter over a set of tech 1 skirts..

[DanThe]

Tech 1 skirts are not for a facelift, paint the lip white too

[G-Bear]

All in all. I actually prefer an IS lip with no skirts on a two door.

[shedrool83]

will look good mate, a fair few put se skirts on a 318is. adit had one like that, what color is the lower rear valance standard black or white ? may have to paint it white to look ok with the skirts particularly tech 1, not sure

heres one, looks much nicer with the se skirts

http://www.ebay.co.uk/itm/BMW-E30-320i- ... 7675.l2557

Front valance is white.

This is the car while it was out the garage.
There isnt an engine in it hence the 4x4 look.



Dont think the wheels are staying on it either .
Properly put the mim 1900 back on.

[magpie]

your gonna have to go 'IS' splitter and no kit or you'll need a brembo rear valance apron to finish the look with se skirts FTW!

[shedrool83]

your gonna have to go 'IS' splitter and no kit or you'll need a brembo rear valance apron to finish the look with se skirts FTW!

I have a pfeba (think thats what its called) pre-facelight rear valance apron might be able to do something with that.

[magpie]

yeah i think i know the one but it points up towards the rear so more pre face than facelift .

i very nearly had mine with is lip and splitter + se skirts + brembo rear valance .
I had the skirts with fixings all painted up ready for the brembo valance or similar that did come up for sale at least three times this last year just gone but decided to leave it naked and concentrate on other areas .


i see why your thinking tech 1 skirts to match that rear apron now.

[shedrool83]

Yeah thats the one .
Looks like this

[magpie]

Yeah thats the one .
Looks like this

it's all tiger sealed to a chromie wrong door though .

ebay search rear spoiler [e30] there are some there you might like if going face lift look with se skirts .


it's your car though dude so what ever floats your boat is king !

[Fal_325i]

yeah i think i know the one but it points up towards the rear so more pre face than facelift .

i very nearly had mine with is lip and splitter + se skirts + brembo rear valance .
I had the skirts with fixings all painted up ready for the brembo valance or similar that did come up for sale at least three times this last year just gone but decided to leave it naked and concentrate on other areas .


i see why your thinking tech 1 skirts to match that rear apron now.

Oh Mick!, I'm sure you mean a Breyton rear valance as opposed to a Brembo, not sure if brake calipers would look right hanging off the rear valance

[baur320]

Same wheel/colour as mine



Mine's got a black is lip - been thinking about se skirts, but not convinced whether they will speed up the rusting process....

[shedrool83]

Same wheel/colour as mine



Mine's got a black is lip - been thinking about se skirts, but not convinced whether they will speed up the rusting process....

What size are your wheels ?

[baur320]

16s

[shedrool83]

16s

Mines are 17" thats why i will proberly go with the 15" mim's

[baur320]

I know what you mean, I had 17" Alpina reps on a previous E30 - not a good ride

[318isPMK]

Yeah I agree I put a chrome grille on and wasnt really a fan of the Red inserts. SE skirts or no skirts work better for me too. But I didnt plan to keep it so didnt mess around with it too much

[magpie]

yeah i think i know the one but it points up towards the rear so more pre face than facelift .

i very nearly had mine with is lip and splitter + se skirts + brembo rear valance .
I had the skirts with fixings all painted up ready for the breyton valance or similar that did come up for sale at least three times this last year just gone but decided to leave it naked and concentrate on other areas .


i see why your thinking tech 1 skirts to match that rear apron now.

Oh Mick!, I'm sure you mean a Breyton rear valance as opposed to a Brembo, not sure if brake calipers would look right hanging off the rear valance

indeed ,it was new yrs eve though

[kieran325]

I got all excited when I read the title of this thread

[polsta]

All in all. I actually prefer an IS lip with no skirts on a two door.

i agree, on my black is i had is splitter and tech 1 spoiler, i aquired some matching color se skirts, but never fitted them, prefered without