e30 325i sounds like a diesel
Moderator: martauto
-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
have a listen on you tube can any one tell from the noise what this could be hope its not as bad as it sounds
Last edited by imye30 on Sun Dec 30, 2012 12:37 pm, edited 2 times in total.
-
makman
- E30 Zone Regular

- Posts: 361
- Joined: Thu Oct 13, 2011 11:00 pm
get a long metal object like a screwdriver and press one side to your ear..then go along the cylinder head with the otherside....like a doctors stethascope lol...youl hear an irregularity on the problem area..wether it be a snapped rocker arm or big end bearing etc. it doesnt sound like a misfire bit to eliminate it go through your plug leads by removing them and seeing if the noise changes.
Canny Beat a chromie!'


-
maxfield
- Old Skooler

- Posts: 15186
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
That ain't a misfire.
Pull the rocker cover off and have a look for something obvious like a snapped rocker. It's only a few 10mm nuts.
Although the problem sounds more bottom end and with the post you put about oil pressure light doesn't look promising.
Pull the rocker cover off and have a look for something obvious like a snapped rocker. It's only a few 10mm nuts.
Although the problem sounds more bottom end and with the post you put about oil pressure light doesn't look promising.

-
makman
- E30 Zone Regular

- Posts: 361
- Joined: Thu Oct 13, 2011 11:00 pm
ah i didnt know you was having oil pressure problems also
^^^^^ what max said lol
if theres no rocker arm damage etc...drop your oil and check for metalic particles..if there present then its bottom end damage
if theres no rocker arm damage etc...drop your oil and check for metalic particles..if there present then its bottom end damage
Canny Beat a chromie!'


-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
I think it's oil pressure the oil light does come on an flicker wen driven
-
maxfield
- Old Skooler

- Posts: 15186
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
Red oil light on the instrument cluster?

-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
I would think that's bottom end
Had the same on my 1st touring, even the bit in the vid where it goes quite for a few seconds, then starts knocking again.
Had the same on my 1st touring, even the bit in the vid where it goes quite for a few seconds, then starts knocking again.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
if its the bottom end is that a lot of work an what sort of cost can that be
-
maxfield
- Old Skooler

- Posts: 15186
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
Be easier and cheaper to put a known good engine in.

-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
nice one cheers to be honest it was up for sale been told might be a good idea to break it for parts as i need a small car now women hey
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
low oil pressure = starved top end which leads to broken rockers, and that's what it sounds like it has 
-
makman
- E30 Zone Regular

- Posts: 361
- Joined: Thu Oct 13, 2011 11:00 pm
has it been regularly serviced mate?
Canny Beat a chromie!'


-
imye30
- E30 Zone Regular

- Posts: 554
- Joined: Thu May 27, 2010 11:00 pm
- Location: manchester
Is that expensive to get fixede30topless wrote:low oil pressure = starved top end which leads to broken rockers, and that's what it sounds like it has
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Nasty, either a broken rocker or a spun shell, either way lots of work to sort out.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
